Pictures should explain it's Condition
EASILY SEEN IN BIG AIR!
2 Flights since build:
A friend wanted me to build him this kit as he was moving from Trex to Goblin and wanted his first one built by someone that has built over 40! Assembled as they all do > Problem-less!
Installed Quantum, Talon, BK on all 4 bases, ikon, Pulse 6s. He went with me to the field to test hop! 3 flights x 30 seconds to tweak in the tail & she was ready to maiden. I flew it for a 4+30 Sport flight (zero issues), landed, took some temp readings & reloaded a fresh Pack. This time it was >friends< turn, but he was a little Timid / Shy and basically did some pattern / Scale type flying for his entire flight = HE LOVED IT!
No more 6s packs so I brought out Bigger -Brother 630 and after about 3 minutes of Flips, Rolls, Loops, he yelled out "I WANT IT"!
So ends the story!!
Since I had use for all the Electronics in a 570 I was building, except for the Motor, those items were removed & this is why it only has a motor in it.
Mini Chip in trailing edge of one blade (dropped off my bench) on assembly
Mini crack in Canopy (No Idea how it got there)?
Quantum Goblin Edition 4120-1200 (6s) 3300-4500mah 3D Motor
Upgraded to Sport Swash #H0477-s
Lynx CNC Struts
34mm Servo Brackets
1x Used (a tad banged up, "blew out of my truck" on the way home from the field), Large Motor opening (had a tall KDE Motor in one of my other 500's), quick release canopy pins.
1x Used L&R lower frame assembly #H0258-s
1x (NOP) Tail push tube (no hardware / tube only) #HC235-s
1x Used Main Gear #H0209-s
1x Used Pinion Gear #H0210-s
1x Used 2nd Bat Tray #H0252-s
1x (NIP) Plastic “OE” Struts #H0262-s
3x (NIP) 36mm Full size Servo Brackets
1x (NIP) Foamy Blade Holder #HA001-s
1x (NIP) Vertical Tail Fin #H0281-s
2x (NIP) Skids #H0285-s
1x (NIP) Canopy Mousse #HA006-s
1x (NIP) Canopy Edging #HA112-s
*** Partial disassemble will be required to ensure safe travel ***$?00.00 S&PP