RunRyder RC
 5  Topic Subscribe
WATCH
 1 page 460 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsBrain iKon › Zero pitch mechanical setup.
07-07-2017 07:15 PM  4 months agoPost 1
Raptor Freak

rrApprentice

Auburn, Wa

My Posts: All  Forum  Topic

Im on the servo setup for 90deg on my servo horns but cannot get zero pitch at mid stick. All my links are turned in as far as they will go and can only get to about 4 to 5 degs not zero. Am i missing something?? Trex 700e dfc.

PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2017 09:23 PM  4 months agoPost 2
Flyin for Jesus

rrVeteran

Dana Point, Ca.​92629

My Posts: All  Forum  Topic

I've had this issue and had to cut down links... also had to order new links once.

Shoot a pic and post it... maybe we'll something that you don't.

PM  EMAIL  Attn:RR  Quote
07-08-2017 01:35 AM  4 months agoPost 3
ticedoff8

rrKey Veteran

Morgan Hill, CA. USA

My Posts: All  Forum  Topic

I assume this is a Trex 700E Pro DFC?

Check that the DFC arms are screwed all the way in (shortest) and then make sure your servo swash links are the correct length (check the 700E build manual):
http://www.align.com.tw/manuals-en/helicopter/

But, if it is a different version of the 700E, does your 700E have the A-arm bellcrank for one servo?
Or, do all 3 swash servos have direct links to the swash?

I ran into problems like this with a Trex 600E that has two servos with direct links to the swash and the 3rd servo connected to the A-arm that moves the swash and acts as the swash anti-rotation guide.

The problem I had was that my A-arm was not adjusted to its true "center" per the way Align designed it.
It was centered based on what I though it should be.

And, it made it tough to to 0 the blade angle.

Believe 1/2 of what you see and none of what you hear.
Fake News will be the downfall of our Republic!

PM  EMAIL  GALLERY  Attn:RR  Quote
07-12-2017 03:58 AM  4 months agoPost 4
Raptor Freak

rrApprentice

Auburn, Wa

My Posts: All  Forum  Topic

Got it figured out. Thanks.

PM  EMAIL  GALLERY  Attn:RR  Quote
07-12-2017 07:46 PM  4 months agoPost 5
JuanRodriguez

rrProfessor

The Villages,​Florida

My Posts: All  Forum  Topic

Why not post what you "figured out" so that others may benefit???

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
07-14-2017 03:31 AM  4 months agoPost 6
Raptor Freak

rrApprentice

Auburn, Wa

My Posts: All  Forum  Topic

All i did was drop the servo arms down a bit. Thay are not at 90degs but i still get 0 deg pitch at mid stick. and still have enough servo movement no binding to get up to 14 degs pos and neg. probably wrong, but hey it works.

PM  EMAIL  GALLERY  Attn:RR  Quote
07-14-2017 09:57 PM  4 months agoPost 7
rcflyerheli

rrKey Veteran

Granbury, TX USA

My Posts: All  Forum  Topic

As has been suggested, can you not put them at 90, and shorten the links from the servo arm balls to the swash balls.

Your issue is mechanical setup, and there are so many 700s out there, without issues. By not having the arms at 90, you will get some odd flight interactions between cyclic and pos/neg collective.

Goblin 700, Trex 700DFC, Gaui X7, Logo 690SX, Logo 600SX; Trex 470 Trex 500
Amain Team Rep

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 460 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsBrain iKon › Zero pitch mechanical setup.
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Tuesday, November 21 - 3:54 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online