RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 109 views POST REPLY
Scorpion Power ProModeler
Helicopter
e-
Align
T-REX 500 › Picked up a 500L kit , servo sugestion
07-05-2017 01:27 PM  22 days agoPost 1
870heli

Senior Heliman

Monson Ma. USA

My Posts: All  Forum  Topic

I picked up a 500L kit so I need servos. I have a lot of std. size but no mini's. Now I have the opinion to shop.
Just looking for recommendation's, good, bad ?
Thanks Buz

PM  EMAIL  GALLERY  Attn:RR
07-05-2017 08:43 PM  22 days agoPost 2
JuanRodriguez

Elite Veteran

The Villages, Florida

My Posts: All  Forum  Topic

Straight from the manual....

●DS515M Digital servo X 3
●DS525M Digital servo X 1

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR
07-05-2017 09:14 PM  22 days agoPost 3
Solmanbandit

Elite Veteran

Tucson , AZ

My Posts: All  Forum  Topic

Mks 9767 cyclic
BK 7002 TAIL.
I had this combo and loved it.

Trex 700E / Trex 500 ESP - Ikon/ HD 500 - Ikon 2/ Goblin 500 Ikon 2

PM  EMAIL  GALLERY  Attn:RR
07-05-2017 09:32 PM  22 days agoPost 4
Danny Calderone

Key Veteran

South Jersey

My Posts: All  Forum  Topic

I can say, the 515 on cyclic, and 525 on the tail do a very impressive job on mine. And I push it mercilessly.

Signature

PM  EMAIL  GALLERY  Attn:RR
07-05-2017 09:52 PM  22 days agoPost 5
Solmanbandit

Elite Veteran

Tucson , AZ

My Posts: All  Forum  Topic

I have the 525 on my current 500 and find it ok, but the BK is much better. You have to notch it little bit to fit it, but is well worth it

Trex 700E / Trex 500 ESP - Ikon/ HD 500 - Ikon 2/ Goblin 500 Ikon 2

PM  EMAIL  GALLERY  Attn:RR
07-06-2017 02:34 AM  21 days agoPost 6
ICUR1-2

Elite Veteran

Ottawa, Ontario

My Posts: All  Forum  Topic

My 525 died suddenly one day, maybe 3 months old, no signs of it going bad beforehand. Lucky it happened before take off.

replaced it with an RJX 0390

sometimes it's worth paying a little more

spending time, paying attention

PM  EMAIL  GALLERY  Attn:RR
07-06-2017 12:25 PM  21 days agoPost 7
870heli

Senior Heliman

Monson Ma. USA

My Posts: All  Forum  Topic

Thanks for the recommendation's.
I have a 500 t-rex flybared with 515M and 525 on the tail. They seam to work well. I have never been one to go for the high end, not that II wouldn't like to. I have never had BK's but hear good things abought them. I don't know if my flying would benefit much buy them. Not a 3D guy so not as demanding on the equipment.
Align combo's are hard to beat but this 500L was the kit and I need to come up with servos.
Thanks again
Buz

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 109 views POST REPLY
Scorpion Power ProModeler
Helicopter
e-
Align
T-REX 500 › Picked up a 500L kit , servo sugestion
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Thursday, July 27 - 11:43 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online