RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 384 views
06-20-2017 11:54 AM  6 months agoPost 1
BK479

rrApprentice

usa

My Posts: All  Forum  Topic

I just picked up a set of savox 1250 500 size servos would these work fine on a old gaui stretch 425 head hunter frame running 500mm blades. The only thing that concerns me is it only has 63 ounces of torque

PM  EMAIL  GALLERY  Attn:RR
06-20-2017 05:19 PM  6 months agoPost 2
Pistol Pete

rrProfessor

Seffner, FL

My Posts: All  Forum  Topic

Savox 63 in.oz. @ 6V

For comparison, Aligns 500 servos are rated at:
3.7 kg.cm. @ 4.8V (51 in.oz.)
4.6 kg-cm @ 6V (63 in.oz.)

Given you will be swinging longer blades, definitely power at the highest voltage.

Those torque numbers are the average "standard" servo size ratings.

However, I dont think I would stick-bang them vs avg. 3D

~~Enjoying the hobby one flight at a time~~

PM  EMAIL  HOMEPAGE  GALLERY  BLOGAttn:RR
06-21-2017 11:50 AM  6 months agoPost 3
BK479

rrApprentice

usa

My Posts: All  Forum  Topic

So for sport flying and mild 3d would be OK flips rolls and will they hold up in like tick tocks

PM  EMAIL  GALLERY  Attn:RR
06-21-2017 01:28 PM  6 months agoPost 4
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

They will be fine. Just run them at 6v as Pete said.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
06-21-2017 04:30 PM  6 months agoPost 5
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

I agree....

Also, I wouldn't run any "system" at less than 6V....

Check out pics #3 & #4 in my gallery. These are pics demonstrating
the voltage undershoot of an SBEC whose output voltage is set to 5V.

The SBEC is a crappy one...it's the internal SBEC of an Eflite EFLA370H ESC. I just used it to demonstrate what voltage undershoot looks like.

And to demonstrate what happens when a large value electrolytic capacitor is connected in parallel to the SBEC output(pic #4).

Most SBECs nowadays have much better performance.

FWIW

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  Attn:RR
WATCH
 1 page 384 views
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Monday, December 18 - 6:23 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online