RunRyder RC
 5  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 774 views POST REPLY
Scorpion Power Scorpion Power
06-19-2017 03:44 AM  4 months agoPost 21
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

Pm answered. In short, no. You're good to go with mini v + sats

if it ain't broke, break it.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-19-2017 03:50 AM  4 months agoPost 22
rcflyerheli

rrKey Veteran

Granbury, TX USA

My Posts: All  Forum  Topic

No, the miniV you will be using has a built in sensor.

Goblin 700, Trex 700DFC, Gaui X7, Logo 690SX, Logo 600SX; Trex 470 Trex 500
Amain Team Rep

PM  EMAIL  GALLERY  Attn:RR  Quote
06-19-2017 04:43 PM  4 months agoPost 23
Yak54

rrNovice

Canajoharie ny usa

My Posts: All  Forum  Topic

Trex 500

Ok got the 500 all set up with the mini v bar,now when getting ready to hover why does it want to tip to the right

PM  EMAIL  GALLERY  Attn:RR  Quote
06-19-2017 04:46 PM  4 months agoPost 24
JuanRodriguez

rrProfessor

The Villages, Florida

My Posts: All  Forum  Topic

Are you giving input while on the ground to correct what you think may be movement ?? Is this your first FBL experience ??

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
06-19-2017 05:38 PM  4 months agoPost 25
Yak54

rrNovice

Canajoharie ny usa

My Posts: All  Forum  Topic

Trex 500

Yes I have to give left Aileron to correct,now my 600e pro dfc with the ar7200bx come straight off the ground

PM  EMAIL  GALLERY  Attn:RR  Quote
06-19-2017 06:05 PM  4 months agoPost 26
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

If you're 100% sure you've gone through setup correctly;

AND when initialized you give the correct swash movements the swash reacts properly, that is right stick==right swash tilt right; and right stick forward == swash tilt forward;

AND when you physically move the model the swash reacts AGAINST your movements--that is you rotate the model like aileron left and the swash reacts with aileron right; or rotate the model like elevator forward and it reacts with elevator back;

THEN you can be confident that when you just lift off it will be fine.

If you try to lift off very slowly with vbar, one skid will be more firmly planted on the ground than the other (that's just the way torque works) and the vbar will add in correction to cyclic to fight this. you just need to lift off more quickly.

if it ain't broke, break it.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-19-2017 08:05 PM  4 months agoPost 27
Yak54

rrNovice

Canajoharie ny usa

My Posts: All  Forum  Topic

Got it figured out,Aileron trim was active when hitting throttle hold

PM  EMAIL  GALLERY  Attn:RR  Quote
06-19-2017 10:23 PM  4 months agoPost 28
JuanRodriguez

rrProfessor

The Villages, Florida

My Posts: All  Forum  Topic

If you're 100% sure you've gone through setup correctly;
AND when initialized you give the correct swash movements the swash reacts properly, that is right stick==right swash tilt right; and right stick forward == swash tilt forward;
AND when you physically move the model the swash reacts AGAINST your movements--that is you rotate the model like aileron left and the swash reacts with aileron right; or rotate the model like elevator forward and it reacts with elevator back;
THEN you can be confident that when you just lift off it will be fine.
Pretty much what I told him in a response to a PM.....

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
06-19-2017 10:27 PM  4 months agoPost 29
Yak54

rrNovice

Canajoharie ny usa

My Posts: All  Forum  Topic

Thanks for all the help guys I appreciate it

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 774 views POST REPLY
Scorpion Power Scorpion Power
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Monday, October 23 - 11:03 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online