RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 342 views
HelicopterFlybarless Rotor Head SystemsBrain iKon News  New Firmware & Windows, Android, iOS apps 3.1.001
06-10-2017 12:36 PM  6 months agoPost 1
rik

rrNovice

Italy

My Posts: All  Forum  Topic

As usual Software and Firmware update will be automatic and system will prompt user to update once powered unit is connected to a Windows PC with internet connection active.
But for those with Brain that no longer use the Windows application so frequently (because the controller is fine as it was set up), let's know who was interested in the release of the following cumulative updates (the second and last includes the first) this week:

- 3.1.000 (firmware 3.1.000) 05 June 2017
• Added management of the new "HoTT + telemetry" protocol and the relative connection schemas
• Added Graupner "Telemetry"
• Added Graupner "Integration"
• Ex Bus telemetry: further revised many parameters names that now are more obvious on TX (to update names, is needed a new "SENSORS AUTO DISCOVER"
• Ex Bus telemetry: It is not possible reduce the servos frequency below 92Hz: Fixed
• Ex Bus integration: released new version of "brain.bin" file and PDF readme instructions (downloadable from MSHELI website)
- New faster autorotation bailout ramp from the governor engage (50%) point to the target RPM (pay attention if you have high "Bailout Ramp" value!)
- Governor: improved the overspeed control with nitro's
- New Boot Loader 1.7 From this release on, is possible put the unit in Boot Loader mode shorting the TX & RX of SYS also with longer cables and also shorting CH4 & CH5 at power up (mainly for Brain2 units with Bluetooth and without the SYS connector)
- Saved in the Brain memory some new model information's (Model type, Main Blades type, Tail Blades types, Cyclic Servos type, Tail Servo type, Motor type, ESC type, Battery type, etc.) to simplify/automate/speed up the setup of the unit
- Choosing from the first page of Wizard, one of the listed Tail Servos and/or one of the listed Cyclic Servos, if the unit is in factory reset, the values in the Wizard panel 2 "Servo Setup" are set to the specified values
- Choosing from the first page of Wizard, one of the listed Models, if the unit is in factory reset, the values of the Wizard "Swashplate Type selection" and "Blades Size Selection" are set to the specified values for that model.
- Separated Servos chart for cyclic and for tail in the panel 2 "Servo Setup" of the wizard
- Now doing a double click on the row of the servo in the Servos chart, the servo chart displayed values are automatically set in to the Brain
- Added in the Servos Charts Align DS530 & DS535 standard version and "M" version and MKS DS1220, DS1230, DS1240
• Now Factory Defaulted unit record/log by default ten flight parameters at the maximum sampling rate
• In the Log reversed the polarity of the "Swash Aileron" signal so, now correspond to the polarity of the "Transmitter setup" panel
• Added a check to avoid using the same radio channel for different Calibration Channels (Dials)
• Revised variables names: RxRoll->RxAileron & SwashRoll->SwashAileron
- If radio channel assigned to "Tail gain", is disactivated with the checkbox "Is set in software", the same channel also if it is present but "greyed out" can be used for other functions
- In Advanced->Setup the active Setup is now highlighted
- Added the new "README_for_HOTT_telemetry_and_integration_for _BRA IN.pdf" in the MANUALS page
- Updated version of "README_for_ESC_datas_log_and_telemetry.pdf" (ESC telemetry work also with Futaba T-FHSS used by T10J & T6K-V2)
- Updated version of "README_for_Jeti_integration_for_BRAIN.pdf" (use of menu key for incremental value, added graphic page for vibrations)
- Also Tail servos signal is now turned off before a firmware update to avoid displacement at the start of the firmware update that sometime happen (for update from this firmware on)
- Improved/increased/completed the Blades Size range displayed inside the icons of panel 10 "Blade Size Selection" of the wizard
- In Basic->Servo Setup: added the new kind of dotted border around the icons if the relative default values are changed from the user
- In Basic->Blades Size Selection: added the new kind of dotted border around the icons if the relative default values are changed from the user
- In Basic->Flight Style Setup: added the new kind of dotted border around the icons if the relative default values are changed from the user
- Advanced->Common->Governor, added calculators for main gear and for tail gear calculation (as in Wizard)
- Wizard panel 12 Governor, added sliders for the change of Speed1, Speed2 & Speed3 (as in Advanced)
- Improvements to French and Russian instructions
- Revised and updated English instructions
- Revised and updated Italian instructions
- Improvements/optimization/compression/reduction/speed up of the code

- 3.1.001 (firmware 3.1.001) 07 June 2017
- Only on Brain1 and only using S.Bus sometime some radio frames are lost causing very short breaks in the controls: Fixed
- Added KST servos in the list of page 1 of the wizard and in Servo Charts of page 2
- Added in Tail blades list, Cyclone brand
- Added in ESC list, Graupner Brand
- Added in models list Goblin 650
- Revised the Blade size icon "515-640" to "515-650"
- Auto Level checkbox activation on channel assigned to Aux now set the Auto level Gain value
- Improved some HoTT schematics
- Updated version of "README_for_HOTT_telemetry_and_integration_for _BRA IN.pdf" in the MANUALS page
- Updated version of "README_for_Jeti_integration_for_BRAIN.pdf" (use of menu key for incremental value, added graphic page for vibrations)
- Improvements to the French instructions

Android app is already released from Google.
iOS app is in review from Apple, and we hope Apple release today, tomorrow or Monday (as usually Apple is more slow than Google).

For some images about Graupner integration, you can see inside the instructions:
http://update.mshbrain.com/software...n_for_BRAIN.pdf

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 342 views
HelicopterFlybarless Rotor Head SystemsBrain iKon News  New Firmware & Windows, Android, iOS apps 3.1.001
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, December 15 - 12:53 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online