RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 215 views POST REPLY
ProModeler Scorpion Power
HelicopterAntiques or Out of Business › Fan shroud options for gmp .60 competitor / super cobra
05-21-2017 10:10 PM  87 days agoPost 1
DeeBee123

Heliman

Rossville, GA

My Posts: All  Forum  Topic

Some one cut back the shroud on my competitor. It now is cut back so that it ends in a semi- circle about 1/4 above the head.

The frame is broken at the weakest spot on the bottom front, and the plate someone used for repair covered the bottom of the shrouds outlet.
Of course I will need to replace or repair the frame as well.

I imagine that a few different .50-70 sized shrouds could be made to work.
Airframe wise I don't know if cobra/ super cobra frame is the same, or which hirobo falcon , or Psi frames would likely work.

I also need to find a collar the same size as the clutch/ starter shaft to secure the clutch/pinion. A simple measurement should tell me what size I need. Then the challenge of identifying which collars are the proper size begins. It isn't on the parts diagram but some pictures show it just above the pinion. My shaft most definitely has a small slightly machined area for the collar as well as a two shoe clutch like the hirobo birds.

If you know which parts will work or have a shroud ,frame or collar that will work please let me know.

Thanks.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 215 views POST REPLY
ProModeler Scorpion Power
HelicopterAntiques or Out of Business › Fan shroud options for gmp .60 competitor / super cobra
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, August 17 - 8:20 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online