RunRyder RC
 0  Topic Subscribe
 1 page 193 views POST REPLY
ProModeler Scorpion Power
Classifieds - Elec-Helicopters
› SYNERGY 766 with Kontronik Kosmik Cool 200, Xnova 4530, Xpert R1 servos VBAR Thunder Power all new.
05-12-2017 03:26 PM  12 days agoPost 1

Senior Heliman

Towson, MD

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Selling my newly built, never flown Synergy 766 with all new electronics and parts. I built this kit over the winter with intentions of flying this spring/summer but my 9 month old has taken all of my free time and there's no end in sight. I hate to shelf such an amazing bird so I'm going to let it go at a discounted price. If the package doesn't sell in a reasonable amount of time I will part everything out after selling the airframe first.

All electronics were new for this build and I kept all of the boxes. I spent a lot of time building this kit to perfection, changing out any factory defective parts that weren't perfect. The frame edges only have been sanded to get rid of all sharp corners. I took a lot of time with this to avoid scratching the sides. There are no scratches anywhere on this helicopter, the cosmetics are perfect. All screws were de-greased and then appropriately loctited. The canopy and the side panels are still wrapped in the box, I never mounted them up. Also the tail boom has not been mounted but the torque tube bearings are installed on the shaft. The electronics have been powered up for set up only, but I have not tidy'd up the wiring. I can do it if requested but the next owner might want to put his own finishing touch on it. The servos are centered and the linkages are all perfect. Also the Kosmik has been programmed along with the VBAR Neo and the JLog.

Everything works perfectly and set up for a Futaba 18SZ radio. The radio is not included, just the heli, but I can copy the program if you're using the same radio. The Thunder Power battery has never been used, I kept a storage charge on it. I've been building helis for 25 years so you can be at ease knowing it was built and set up correctly, plus a local Synergy Rep looked over the build and tweaked the settings. I did not purchase main blades for this heli so the new owner will need to buy some of his choice.

I will only accept old fashioned USPS Money Orders. Sorry but I will not accept or support PayPal. Everything will be packaged with care and shipped in a large box UPS ground. If you're local and want to see the heli in person, we can set that up. Local pick up is fine too.

I'm asking $2950 for everything shipped, you're saving about 25% off the new prices. If you have any question, please shoot me a PM. Thanks for looking! Tom

Pictures are in my Gallery under Synergy 766!

Here's what's included, all parts were brand new for this build:

Synergy 766
25 tooth Speed Up
MSH 71022 max version 2 magnetic canopy mount
12 Tooth pinion from the E5 kit
Kontronik Kosmik Cool 200
Xnova 4530/8D-500 10P A Shaft
Xpert R1 HS-6401-HV BLS
Xpert R1T HS-3302T-HV
JLOG 2.6
Rail R-116 mm tail
VBAR Neo 6.1 Express
Futaba R7008SB2
Pulse 1350 receiver pack
TP Elite TP5000-12SE55S

 1 page 193 views POST REPLY
Classifieds - Elec-Helicopters
› SYNERGY 766 with Kontronik Kosmik Cool 200, Xnova 4530, Xpert R1 servos VBAR Thunder Power all new.
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Classifieds › HELP-FAQ
Attention buyers! For sellers to Add Classified Feedback you need to Post Reply in the seller’s topic thus creating the green feedback link.
Stating price is not mandatory but recommended. Complaining about price or complaining about pre-sale negotiations is inappropriate and against policy.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Thursday, May 25 - 12:29 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online