RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 178 views POST REPLY
Hitec RCD ProModeler
HelicopterRadio - Futaba FASST › Disabling gimbals
04-24-2017 04:00 PM  31 days agoPost 1
Jamovich

Veteran

Mumbai, India

My Posts: All  Forum  Topic

Hi guys

How would you program a condition to suspend gimbal inputs while the momentary switch is engaged? (Purpose is to use with rescue mode so as to prevent the heli from diving into the ground in case I forget to let the sticks go while engaging the rescue)

Thanks for any help!

PM  EMAIL  GALLERY  Attn:RR
04-24-2017 07:16 PM  31 days agoPost 2
knightofcarnage

Elite Veteran

chicago

My Posts: All  Forum  Topic

well you can't if i'm understanding what you are asking. The closest to disabling stick input is dead band. But is mostly are asking is gyro unit features. And each manufacture handles it differently. Example neo vbar flips and pushes positive until it gets TH input. Align on 150X only flips out and you need to provide proper TH input. Ikon will similar to vbar but also let you change flying style.

You also forgot to mention what radio you are using. There might a way of program huge exp on all stick movement when you hit rescue switch. But some gyro don't like mixing in expo from radio.

You should also understand rescue can cause more damage then just hit TH-hold and taking the hit. For example if you gyro flips out and hit positive pitch, like a neo. If you hit rescue to late, the heli can flip while its crashing into the ground at a high motor speed causing a lot more damage.

PM  EMAIL  GALLERY  Attn:RR
04-24-2017 08:52 PM  31 days agoPost 3
Ace Dude

rrProfessor

USA

My Posts: All  Forum  Topic

It can done on an 18MZ at least. I have a condition I use for bench setup where it centers all the outputs. I disable this condition at the completion of bench setup so it cannot be activated accidentally.

  

PM  EMAIL  GALLERY  Attn:RR
04-24-2017 10:33 PM  31 days agoPost 4
PaulBowen

Veteran

East coast Australia.

My Posts: All  Forum  Topic

Assign the dual rates to the momentary switch and set the rates to 0%

Futaba T18SZ, JR Propo XG14, Hirobo fanatic!

PM  EMAIL  GALLERY  Attn:RR
04-25-2017 02:49 AM  31 days agoPost 5
Jamovich

Veteran

Mumbai, India

My Posts: All  Forum  Topic

Thanks guys. Sorry forgot to mention I use the 18sz

I use the vbar neo and the demon 3SX.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 178 views POST REPLY
Scorpion Power GLOBAL 3D
HelicopterRadio - Futaba FASST › Disabling gimbals
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, May 26 - 10:18 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online