RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 500 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Futaba FASST › Is futaba compatability with frsky ?
04-08-2017 08:57 PM  6 months agoPost 1
jez33

rrNovice

south east kent, uk

My Posts: All  Forum  Topic

OK I've got a ff8 futaba radio and have got a frsky 2.4 module to go in it to convert the tx to 2.4,
the frsky receiver works great,

Here's my question , can I use any accst reciever by futaba or other manufacturers for that matter with the frsky module in my ff8 ?

Cheers in advance

PM  EMAIL  Attn:RR  Quote
04-24-2017 09:44 PM  5 months agoPost 2
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

No. 2.4gHz signal coding is proprietary.

Ben Minor

Team Synergy Team Futaba Team Kontronik USA
Progressive RC

PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2017 06:08 PM  5 months agoPost 3
jez33

rrNovice

south east kent, uk

My Posts: All  Forum  Topic

Cheers for your answer, one more question.
So I'm guessing I need to pick a new receiver which is a 'accst' Which is what I think frysty use ?

Are there other forms of accst which might not work though?

PM  EMAIL  Attn:RR  Quote
04-25-2017 07:09 PM  5 months agoPost 4
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

I'm not familiar with Frsky receiver designations, only Futaba.

Ben Minor

Team Synergy Team Futaba Team Kontronik USA
Progressive RC

PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2017 07:30 PM  5 months agoPost 5
KJH

rrVeteran

Interlochen, MI

My Posts: All  Forum  Topic

For telemetry, you'll need a "D" series FrSky receiver for the FrSky module in your Futaba transmitter.

From Aloft Hobbies:
D Series: (Telemetry receivers)
D8R, D8R-II, D8RSP, D6FR, D4FR
The D series are an older offering from FrSky, they do not support many sensors anymore and will bind in D8 mode. These receivers are ideal if you are using a FrSky DFT, DJT or DHT module in your radio.
And this, regarding "D" receivers:
Compatible with all FrSky transmitters (bind in D8 mode) and also the D series modules like the DFT, DJT, DHT and the DHT-U. Sadly this line is shrinking and there are few sensors left that will work with these receivers. Also, these units are limited to 8 channels.
If you didn't want telemetry, you could use a "V8" receiver:
V8 Series: (Non-telemetry receivers)
V8FR-HV, V8R7-HV, V8R7-SP, V8R4

-Kevin

PM  EMAIL  GALLERY  Attn:RR  Quote
04-25-2017 10:32 PM  5 months agoPost 6
jez33

rrNovice

south east kent, uk

My Posts: All  Forum  Topic

Thanks for your replies,
Yer I don't need telemetry just need a rx which will bind with the frsky module in my ff8.

PM  EMAIL  Attn:RR  Quote
04-25-2017 11:16 PM  5 months agoPost 7
KJH

rrVeteran

Interlochen, MI

My Posts: All  Forum  Topic

You may just want to get a receiver with telemetry, even if you don't want it, now. If you go all in with FrSky, you can have the transmitter spit out the voltage of onboard batteries and other useful information.

-Kevin

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 500 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Futaba FASST › Is futaba compatability with frsky ?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, October 18 - 5:04 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online