RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 301 views POST REPLY
Scorpion Power GLOBAL 3D
Helicopter
e-
Align
Other › New Align ESC default settings
04-03-2017 11:07 AM  81 days agoPost 1
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Does ANYONE know the default settings on these new Align ESC (red ones) (Hobbywing?)????

Actually the only thing I want to know is is the governor ON or OFF????

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
04-03-2017 03:50 PM  81 days agoPost 2
Pistol_Pete

rrProfessor

Seffner, FL

My Posts: All  Forum  Topic

DEFAULT is ON

http://www.align.com.tw/manuals-en/esc/

~~Enjoying the hobby one flight at a time~~

PM  EMAIL  HOMEPAGE  GALLERY  BLOGAttn:RR
04-03-2017 04:05 PM  81 days agoPost 3
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Thank you.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
04-03-2017 10:32 PM  80 days agoPost 4
datidun

Key Veteran

N Ireland

My Posts: All  Forum  Topic

Pistol Pete does the heli have to remain at 0 degrees for 10 to 15 seconds until full speed is recognized at default setting.

PM  EMAIL  GALLERY  Attn:RR
04-04-2017 08:47 AM  80 days agoPost 5
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

I've just read the hobbywing platinum esc manual (same as align esc) and the governor rpm is 'standardised' as soon as full speed is reached i.e. immediately after spool up. The default spool up time is 15 seconds so you simply spool up as normal. You should always be around 0 pitch when spoiling up anyway.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
04-04-2017 12:39 PM  80 days agoPost 6
datidun

Key Veteran

N Ireland

My Posts: All  Forum  Topic

So basically its operating the same way as the STORED governor except its not stored at the end of the flight.

PM  EMAIL  GALLERY  Attn:RR
04-04-2017 01:28 PM  80 days agoPost 7
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

That's correct. It will simply govern to whatever the head speed is after spool up for EVERY flight. So you will get different head speeds depending on pack age or state of charge or if you have adjusted the throttle curve.

In governor STORE it remembers the VERY FIRST (I believe there is a reset process if you get it wrong the first time i.e. forgot to charge the pack!) spool up head speed and tries to get that head speed every time no matter the age of the pack or state of charge.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 301 views POST REPLY
ProModeler Scorpion Power
Helicopter
e-
Align
Other › New Align ESC default settings
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, June 23 - 4:42 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online