RunRyder RC
 6  Topic Subscribe
WATCH  2 pages [ <<    <     1     ( 2 )    >    >> ] 807 views POST REPLY
GLOBAL 3D Hitec RCD
HelicopterScale Model RC Helicopters › Need help with weird tail vibrations
aashu

Key Veteran

scotch plains, NJ

My Posts: All  Forum  Topic

Hi

I would say around 1000 RPM. I have a linear curve and at about 65% stick position..

I am using 12s on 415KV with 90/18 on gear and 22/48 (SDP pully) on belt giving me 10.9:1 ratio

Garden State, NJ

04-04-2017 02:05 PM
PM  EMAIL  GALLERY  Attn:RR
aashu

Key Veteran

scotch plains, NJ

My Posts: All  Forum  Topic

video

with new blades , pitch slider and shaft.

Watch at YouTube

another one with blades off

Watch at YouTube

pictures

https://rc.runryder.com/helicopter/...1&TZ=99&a=1&s=0

https://rc.runryder.com/helicopter/...2&TZ=99&a=1&s=0

Once it starts to do that, I can see the shaft move somewhat side to side

Garden State, NJ

04-04-2017 03:07 PM
PM  EMAIL  GALLERY  Attn:RR
East Coast Scale

rrAdvertiser

Taxachussetts

My Posts: All  Forum  Topic

First, the gear ratio should only be 9:1. You are almost 11:1
The bottom should be 40:22 not the 48 tooth you have down there. You are overspeeding the tail rotor, so even if the head is 1000, the tail is way over what it should be. Change the lower gear back to a 40 tooth, and it should be good. Also, the Kv of that motor is really too high. I rarely go over 300Kv on these mechanics to get the head speed i need, especially with 12S packs. You may want to go down to 10s packs as well.

04-04-2017 03:39 PM
PM  EMAIL  Attn:RR
aashu

Key Veteran

scotch plains, NJ

My Posts: All  Forum  Topic

Thanks

Thank you Joe. If I go with a 300kv but keep 12 cell and 48p , would that work ? I am hoping to avoid getting set of new batteries . Would 11:1 not be better since tail would be even slower due to 48p pulley?

If you recommend going back to 40, I will go that route

Garden State, NJ

04-04-2017 04:27 PM
PM  EMAIL  GALLERY  Attn:RR
East Coast Scale

rrAdvertiser

Taxachussetts

My Posts: All  Forum  Topic

Go to 300kv with 12s but change the pulleys back to 40.
Joe

04-04-2017 04:29 PM
PM  EMAIL  Attn:RR
aashu

Key Veteran

scotch plains, NJ

My Posts: All  Forum  Topic

thanks

Got it.

thanks

Garden State, NJ

04-04-2017 05:20 PM
PM  EMAIL  GALLERY  Attn:RR
aashu

Key Veteran

scotch plains, NJ

My Posts: All  Forum  Topic

hi

Ordered a KDE 295KV. Will keep posted

Garden State, NJ

04-04-2017 10:35 PM
PM  EMAIL  GALLERY  Attn:RR
WATCH  2 pages [ <<    <     1     ( 2 )    >    >> ] 807 views POST REPLY
ProModeler Scorpion Power
HelicopterScale Model RC Helicopters › Need help with weird tail vibrations
 Print TOPIC Advertisers 

 6  Topic Subscribe

Monday, April 24 - 6:14 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies