RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 716 views POST REPLY
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 50 › X50 clutch bell on 50v2?
02-18-2017 07:54 AM  8 months agoPost 1
MartyH

rrProfessor

USA

My Posts: All  Forum  Topic

Will the X50 clutch bell work on 50v2?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2017 02:16 PM  8 months agoPost 2
don s

rrElite Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

yes

Bell, clutch, fan, all interchangeable.

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2017 05:42 PM  8 months agoPost 3
MartyH

rrProfessor

USA

My Posts: All  Forum  Topic

Thanks Don.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2017 07:37 PM  8 months agoPost 4
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

No, it won't work. The X50 clutch bell is like the R50 SE, the bell is taller were the pinon gear threads in.

PM  EMAIL  Attn:RR  Quote
02-18-2017 08:03 PM  8 months agoPost 5
don s

rrElite Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

Oops, my bad. So 50SE and X50 compatible then?

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2017 08:23 PM  8 months agoPost 6
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

I'm not sure. But they both use different pinon gears.

PM  EMAIL  Attn:RR  Quote
02-18-2017 09:37 PM  8 months agoPost 7
MartyH

rrProfessor

USA

My Posts: All  Forum  Topic

Dang it. I already bought it.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2017 09:47 PM  8 months agoPost 8
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

MartyH

You might be able to use that X50 clutch bell. Check out the X50 manual, in it is a diagram on how to use a R50 clutch set-up in the X50. It might give you some ideas on how to use that bell in your R50.

PM  EMAIL  Attn:RR  Quote
02-19-2017 01:09 AM  8 months agoPost 9
jackp332

rrKey Veteran

Claremont, Nh USA

My Posts: All  Forum  Topic

Marty, my X50b manual lists the clutch bell as part# pv0671-1. I did a quick search on the Raptor 50 Clutch bell and this is the same number I came up with on ebay. The listings i viewed said fits Raptor 50/ x50.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-19-2017 01:36 AM  8 months agoPost 10
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

PM  EMAIL  Attn:RR  Quote
02-21-2017 07:25 PM  8 months agoPost 11
gemheli

rrApprentice

Taunton,Somerset, England

My Posts: All  Forum  Topic

Hello
Whilst looking at the clutch area, can I ask what is the pinion block on the Titan SE (PV0669). What is its purpose?

I just wondered about this part as it appears on the Titan SE only.

PM  EMAIL  Attn:RR  Quote
02-21-2017 07:28 PM  8 months agoPost 12
gemheli

rrApprentice

Taunton,Somerset, England

My Posts: All  Forum  Topic

Sorry
Double post for some reason.

Long live the Raptors.

PM  EMAIL  Attn:RR  Quote
02-21-2017 08:24 PM  8 months agoPost 13
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

3rd bearing block

Additional support of the drive pinion and clutch assy.

PM  EMAIL  Attn:RR  Quote
02-21-2017 08:36 PM  8 months agoPost 14
gemheli

rrApprentice

Taunton,Somerset, England

My Posts: All  Forum  Topic

Thank you very much
A picture paints a thousand words.

I'm assuming you need the matching drive pinion to get it to work.

Do you know if the side frames and clutch bell are different as well?

Is it worthwhile?

I'm guessing it's to take the extra power of the 55 engines.

PM  EMAIL  Attn:RR  Quote
02-21-2017 10:06 PM  8 months agoPost 15
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

gemheli

Side frame are the same as the R30-50(PV0480).

CLUTCH Bell: PV0671
Pinion Gear: PV0670
Pinion Block: PV0669

I would just stick with your X50, It's set-up with the 3rd bearing block.

PM  EMAIL  Attn:RR  Quote
02-22-2017 10:30 AM  8 months agoPost 16
gemheli

rrApprentice

Taunton,Somerset, England

My Posts: All  Forum  Topic

Thank you again

Just to clarify. I'm flying a x50 as well as an older, but essentially rebuilt V2 with most Titan parts added, such as push-pull elevator, longer boom etc.

I was just curious as to which is the preferred clutch/pinion on a pre x50 (V2/Titan using the plastic side frames) as I'm in the process of obtaining parts.

PM  EMAIL  Attn:RR  Quote
02-22-2017 02:41 PM  8 months agoPost 17
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

gemheli

The parts you need is posted above your last post.

http://planetahobby.ru/assets/files..._comparison.pdf

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 716 views POST REPLY
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 50 › X50 clutch bell on 50v2?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, October 21 - 6:38 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online