RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 383 views
Scorpion Power Scorpion Power
HelicopterMain Discussion › Micro beast plus help
02-14-2017 05:52 PM  9 months agoPost 1
rrokman

rrNovice

macomb,michigan

My Posts: All  Forum  Topic

hey guys got my first beastx plus I have 20 other beastx 's what happened to the pirouette direction setting use to be (N)this thing has got me a little confused nervous to spool it up I got a 470lm super combo only the quick reference card came with it I'm not going to use the governor or any other feature that I'm not familiar with I would just like to use it as my others so if you have programmed the plus version any info would be appreciated .

PM  EMAIL  GALLERY  Attn:RR  Quote
02-14-2017 08:29 PM  9 months agoPost 2
tgalo

rrApprentice

USA

My Posts: All  Forum  Topic

Here's what I think happened to step N: The pirouette optimization used to be set in step N but now with the 6 axis sensors the mounting orientation takes care of that. I could be wrong...

Gravity's a bitch ant it?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-14-2017 11:42 PM  9 months agoPost 3
Heli_Splatter

rrElite Veteran

USA

My Posts: All  Forum  Topic

Yeah, I have the plus and it is a bit confusing. There are two settings. Go to that step... when the swash tilts, hold the heli by the main rotor and let the heli move around the shaft. The swash should stay pointed in the same direction all the way around. If not, choose the other setting with the rudder stick and try the test again.

Different, but it works... I like the new setup.. easier and faster. It is flying great for me. Now I want to incorporate the governor function on my electric heli.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2017 01:06 AM  9 months agoPost 4
rrokman

rrNovice

macomb,michigan

My Posts: All  Forum  Topic

That was my question, that setting is not on my beastx plus ,it now shows as internal rpm governor for (n) setting in solid programming mode ,there is no pirouette optimization direction selection that I can see on the programming card all my other beastx's have it I have micro 's I have 7200bx's and 7300bx's so I'm curious as what you mean by two settings? Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2017 09:45 AM  9 months agoPost 5
tgalo

rrApprentice

USA

My Posts: All  Forum  Topic

In the V3 Microbeast, the pirouette optimization was set in step N. If you notice, there are now 8 different mounting orientation choices in the V4 rather then just 2 in the V3. So setting the pirouette optimization is no longer necessary because the Microbeast knows what upside down and right side up are. So in short, if the helicopter drifts during pirouettes, V3, check the pirouette optimization setting, V4, check the mounting orientation. Hope this makes sense.
T

Gravity's a bitch ant it?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2017 04:28 PM  9 months agoPost 6
rrokman

rrNovice

macomb,michigan

My Posts: All  Forum  Topic

Thanks !!!for the information I had it ready to fly the other day but decided to wait and make sure why crash on the spool up.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 383 views
Scorpion Power Scorpion Power
HelicopterMain Discussion › Micro beast plus help
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Thursday, November 23 - 8:38 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online