RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 239 views POST REPLY
GLOBAL 3D ProModeler
Helicopter
e-
Electric Motors-Controllers-ESC
ESC › Hobby wing 130 v4 OPTO (solved)
01-24-2017 10:47 PM  5 months agoPost 1
CostaRicaHeli

Senior Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Since there is no BEC, should the two wires that come with the RPM signal wire be connected to the FBL unit or should they be disconnected? Using Brain2 with a 2s Lipo.

Thanks,

Franz

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
01-31-2017 09:58 PM  4 months agoPost 2
fastrc1

Key Veteran

Brooklyn, NY-USA

My Posts: All  Forum  Topic

The signal/ gov wire goes to the FBL gov input

RIP Roman Pirozek Jr.
Team SRW Comp
Zeal Blades U.S. Flight Team
HRP
Team CanoMod

PM  EMAIL  GALLERY  Attn:RR
01-31-2017 10:46 PM  4 months agoPost 3
CostaRicaHeli

Senior Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Thanks.

What about the other two wires that come with the RPM wire from the ESC? Should they be connected to the FBL even if there is no BEC.?

Thanks,

Franz

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
02-01-2017 03:46 PM  4 months agoPost 4
CostaRicaHeli

Senior Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Please see drawing

I just want to make sure that these two cables do NOT have to be plugged into the FBL unit.

Thanks,

Franz

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
02-01-2017 04:31 PM  4 months agoPost 5
fastrc1

Key Veteran

Brooklyn, NY-USA

My Posts: All  Forum  Topic

Where is your receiver in the diagram?

RIP Roman Pirozek Jr.
Team SRW Comp
Zeal Blades U.S. Flight Team
HRP
Team CanoMod

PM  EMAIL  GALLERY  Attn:RR
02-01-2017 04:34 PM  4 months agoPost 6
CostaRicaHeli

Senior Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Spektrum Sats

I have two sats coming out of the Brain.

Franz

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
02-10-2017 11:30 PM  4 months agoPost 7
CostaRicaHeli

Senior Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Answer from Hobbywing Tech Support

Just in case anybody else wonders the same thing, this is the answer from HW Tech Support:

Dear Franz,

It should be connected to the FBL or Receiver.

Best Regards!
--------------------------------------------------------------------------
Tech Support of Hobbywing
2017-02-06
Hobbywing Technology Co., LTD.
(ISO 9001:2008 Quality Management System Certificated)
http://www.hobbywing.com

From: Franz Lara
Date: 2017-01-26 23:23
To: fae_air
Subject: 130 OPTO v4
Quick question, since this is without BEC, do I need to connect the two red/black wires that come with the RPM signal to the FBL unit or receiver? Or can I just leave them unplugged?

Thanks,

Franz

Franz

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 239 views POST REPLY
Scorpion Power GLOBAL 3D
Helicopter
e-
Electric Motors-Controllers-ESC
ESC › Hobby wing 130 v4 OPTO (solved)
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, June 25 - 1:10 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online