Here I am selling some cyclic servos. I have here two sets of three JR DS8717 Cyclic servos and a JR DS8900G tail servo.
All of these servos are used but work like they should.
Servo set #1:
One set of cyclics came off of my Synergy E7SE and before that, my T-Rex 600E Pro DFC. I have put 94 flights on this set of servos. 90 on my T-Rex 600 and 4 on my E7SE. I have put two crashes on these servos but did no more but replace the plastic casing on and all of the bearings as well as pack it with new grease. The first crash caused the main motor on the 600E which is only millimeters from the servo casings, to push against the two aileron servos and grinded some of the aluminum on the casing. This did nothing to the servo electronics, this is only a cosmetic damage. I have two new aluminum casings, two new bottom casing plate as well as two new inner casing plates that will be included with this set of servos. Also included with this set is one set of used screws.
Servo set #2:
This set of servos is for three DS8717 Cyclcic's and one DS8900G tail servo.
This set of servos are used but was rebuilt from spare parts to make a complete spare set of working servos. I have not flown these servos in a heli but have passed all of the tests. These servos also have new bearings and grease. This set will come with three used aluminum servo casings, three used bottom plates, and three used inner casings plates. As well as a new set of screws.
The tail servo was in a goblin 630. I shortened the servo wire and put an extension on it so in case of a crash and the tail boom separated, it wouldn't rip the wire out of the gyro since the tail boom on the 630 separates in a crash.
Servo set #1: $135.00 (SOLD)shipped (USA only)
Servo set #2: $165.00 Shipped (USA only)
Pictures are coming!