RunRyder RC
 9  Topic Subscribe
WATCH
 9 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ] 12889 views POST REPLY
HelicopterScale Model RC Helicopters Docs  450 Scale Lynx AH-7 My first Scale build
11-22-2016 10:56 AM  15 months agoPost 21
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

Hi Rich

I remember seeing a 700 scale lynx some where think the guys name was Len Mount not sure if he does kits might be worth a google and email to ask.

Yes I will be as neat as possible lol slow and steady I'm in now rush to get the airframe into the fuselage until I'm competent flying her.

I did fit larger tail blade which I get from a 450 dominator.

Glen

PM  EMAIL  Attn:RR  Quote
11-22-2016 11:01 AM  15 months agoPost 22
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

Thanks for the Advice CoachE I will bare that in mind

No going to look up what REVO mix is and can I adjust it with Spartan vx1e installed

PM  EMAIL  Attn:RR  Quote
11-22-2016 07:55 PM  15 months agoPost 23
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

I have a question Guys

The 2 tail boom struts don't fit into the fuselage can I dispense with them completely or try and shorten them?

PM  EMAIL  Attn:RR  Quote
11-23-2016 01:42 AM  15 months agoPost 24
CoachE

rrApprentice

Cincinnati, ohio -usa

My Posts: All  Forum  Topic

Just how rigid would you say the fuse is. If the fuse boom is strong enough you can secure the mechanics boom with stiff foam.

Team JR / BD Team Pilot / Get !T - Got !T - Perfect !T

PM  EMAIL  GALLERY  BLOGAttn:RR  Quote
11-23-2016 01:54 PM  15 months agoPost 25
MDSCUSTOMS

rrApprentice

North Wales, U.K.

My Posts: All  Forum  Topic

Hi,

You mentioned the Len Mount fuselage, it is still available but is now handled by Starwood Models. A very nice fuselage (as you would expect from Len Mount) but certainly not cheap !

http://www.starwoodscalemodels.com/....php?13&cPath=2

Mark

I'm only here coz I'm not all there !!

PM  EMAIL  GALLERY  Attn:RR  Quote
11-23-2016 06:10 PM  15 months agoPost 26
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

Well CoachE about as rigid as a unpressurised coke bottle

PM  EMAIL  Attn:RR  Quote
11-23-2016 06:14 PM  15 months agoPost 27
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

They are very nice mark and your right very very expensive glad I'm sticking with smaller ones

PM  EMAIL  Attn:RR  Quote
11-24-2016 12:02 AM  15 months agoPost 28
v22chap

rrKey Veteran

Granger, Indiana

My Posts: All  Forum  Topic

seaman
Generally you are not 3-D ing scale birds ,, so no ... you don't need the boom struts . We flew helis in the old days and for many yrs with out the struts and even did loops, rolls and stall turns with out them .

Larry C ----------Bergen R/C helicopters

PM  EMAIL  GALLERY  Attn:RR  Quote
11-24-2016 12:11 AM  15 months agoPost 29
CoachE

rrApprentice

Cincinnati, ohio -usa

My Posts: All  Forum  Topic

yes i love my "len mount" fuse. but back to yours you could reinforce the boom with some fiberglass tape strips. i have no experience working with the stuff.

Team JR / BD Team Pilot / Get !T - Got !T - Perfect !T

PM  EMAIL  GALLERY  BLOGAttn:RR  Quote
11-24-2016 01:23 AM  15 months agoPost 30
MDSCUSTOMS

rrApprentice

North Wales, U.K.

My Posts: All  Forum  Topic

The fuselage is PETG plastic so fibreglass will not stick to it, I believe the instructions on these kits suggest using a strip of the offcut plastic to reinforce the joints (They do on my UH1-D Fuz which is made in exactly the same way and assembles the same)

You have no worries with the boom supports being removed so should be fine.

Mark

I'm only here coz I'm not all there !!

PM  EMAIL  GALLERY  Attn:RR  Quote
11-24-2016 07:30 AM  15 months agoPost 31
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

Thanks for the info guys I will test fly her tonight without the struts.

PM  EMAIL  Attn:RR  Quote
11-25-2016 04:56 PM  15 months agoPost 32
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

Well Guys I've had a bit of spare time this week and put it to good use starting on the fuselage as well as practicing flying the airframe in pod and boom form which is progressing very nicely as she flies very well indeed.

I started with assembling the tail trimmed it marked up for rear access panel and tail rotor shaft and control bell crank. Test fitted the two halves then sanded the flange on one side and the internal part of other where they join with 400 grade wet and dry to rough the surface to allow better adhesion then injected medium viscosity cyno into the join and allowed to set naturally.

Once set carefully cut the rear access hatch and hole for tail rotor

Next I cut a strip of 1mm plastic card 15mm wide then to correct length trimming as I went and glued to inside of tail pylon

Test fitted the hatch

Next I removed the tail boom from the airframe and inserted it into the fuselage tail and refitted them boom.

I had to make a few adjustments to ensure the bell crank could move freely.

Then the wife insisted on me clearing away the table for dinner

PM  EMAIL  Attn:RR  Quote
11-25-2016 05:29 PM  15 months agoPost 33
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

The Next day I offered up the forward fuselage. I removed one sides skid mount screws to allow the fuselage to slip between.

I then carefully marked for the rotor head and control to exit the fuselage

Using an egg cup I found in our best dinner service with happen to be exactly the right diameter 45mm so I drew round it and continue a line aft to allow for anti rotation mount and cut out.

I made sure the fuselage was central and square refitted the skids and carried out the same process on the other half,

I fixed all parts of the fuselage together with clear tape and sat back and admired her

She looks amazing. I had to remove from the fuselage to fly Thursday evening again she flies beautifully

Glen

PM  EMAIL  Attn:RR  Quote
11-30-2016 10:13 AM  15 months agoPost 34
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

Over the weekend I had some spare to work on the model. Whilst going through my spares box I found A set of skids I think will Work well with helicopter. I also think with some cosmetic disguising I can make them look like the real thing.

My nest step was to tape fuselage together and glue medium Cyno.

Once set I marked where I want the front half to separate. I cut out very carefully using a new blade in my craft knife to ensure a good clean cut.

The Glass of wine was optional as a hand steadier :dribble:

Hopefully will get the frame work made and fitted during the week

Look forward to hearing you comments and suggestion

Glen

PM  EMAIL  Attn:RR  Quote
12-01-2016 12:51 AM  14 months agoPost 35
206 pilot

rrVeteran

,Long Island,new york

My Posts: All  Forum  Topic

Hi Glen looking real, you did a nice job with a steady hand making your cuts, good job!!!! Rich

PM  EMAIL  GALLERY  Attn:RR  Quote
12-01-2016 02:52 AM  14 months agoPost 36
coptercptn

rrElite Veteran

Mesa AZ. USA

My Posts: All  Forum  Topic

Nice job, I've built a few of those "petG" fuses, and they can be challenging!!

Home of the "Sea Cobra".....

PM  EMAIL  GALLERY  Attn:RR  Quote
12-01-2016 05:25 PM  14 months agoPost 37
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

Thanks Rich

A very sharp blade helped a lot as well taking it very slow

Thanks you coptercptn yes they are especially getting glues to bond

Glen

PM  EMAIL  Attn:RR  Quote
12-09-2016 07:38 PM  14 months agoPost 38
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

well Its been a little while since I've had time to write.

I've been working hard on the framing. I used balsa for the frames and 1/8 liteply for the base. brass wire and tube for locating spigots and magnets to hold the to two parts together firmly.

My Wife finally got fed up with me turning our dinning room into a workshop and agreed I could use our spare as a model room.

I finally cured the slight tail wag issue I was having. I replaced the tail rotor servo with an align 620 job done brute force sometimes works. I am going to try a align 525 servo as they a bit smaller but keeping the big brute in for now as I have finally sourced a 4 blade tail rotor. GOD BLESS AMERICA lol so she will really look part static as well as running watch this space.

I Have now test fitted the pod and boom into the fuselage and I must say I an very happy so far. she looks lovely. I cut 4 10mm ply squares and glued then and the fuselage tail join pilot drilled and using captive nuts made the tail removable instead of glued. The boom seems to sit very tight at the tail plyon so I will leave of the boom struts and use foam to brace instead.

I did have a blonde moment. I decided to test run it and she was making a funny laboured noise. on investigation I notice I had accident put an extra twist into the drive belt and wrecked it. Oh well new belts on there way to me now

In the mean time I'm going to tidy up the fuselage fill gaps and get read for painting

PM  EMAIL  Attn:RR  Quote
12-10-2016 02:28 AM  14 months agoPost 39
206 pilot

rrVeteran

,Long Island,new york

My Posts: All  Forum  Topic

Hey glen, your doing a real nice job on that machine.. Rich

PM  EMAIL  GALLERY  Attn:RR  Quote
12-12-2016 04:26 PM  14 months agoPost 40
seaharrierman

rrApprentice

Gosport UK

My Posts: All  Forum  Topic

Thanks Rick She is coming along very nicely.

PM  EMAIL  Attn:RR  Quote
WATCH
 9 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ] 12889 views POST REPLY
HelicopterScale Model RC Helicopters Docs  450 Scale Lynx AH-7 My first Scale build
 Print TOPIC  Make Suggestion 

 9  Topic Subscribe

Friday, February 23 - 8:03 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online