RunRyder RC
 8  Topic Subscribe
WATCH  3 pages [ <<    <     1      2     ( 3 )    >    >> ] 3306 views POST REPLY
Hitec RCD ProModeler
HelicopterScale Model RC Helicopters › Vario Bell 212
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

Thanks guys,

Steve.. i have a Micro Proto TAIG 2000. Its a SWEET HEART!

the bear paw will be cast in rubber and a shore 90 urethane part/s made from that tool. The wax comes from Freeman. I only chose wax because I had it laying around. REN board would have worked too. I have machined quite a bit of REN 472 for vacuum forming.

Super sweet stuff..

Grim

Michael J Zaborowski

12-30-2016 02:46 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
doorman

rrProfessor

Sherwood, Arkansas

My Posts: All  Forum  Topic

No Clue!!

I had no idea that this heli would take this much work....BUT if went to the right guy by the looks of the pics.... cannot wait to see her back in the air...

Stan

AMA 2918-Team JR, Spin Blades, East Coast Scale Helicopter,Castle Creations

12-30-2016 09:13 PM
PM  EMAIL  GALLERY  Attn:RR
PETER ROB

Elite Veteran

Devon UK

My Posts: All  Forum  Topic

one of those fancy machining machine things?!?! I'm jealous.

I am lucky to have full access to one of these machines
As long as you have a drawing program that will produce DXF files, just load and burn

Watch at YouTube

Peter R
Sorry about the title it has nothing to do with the project

01-01-2017 08:17 AM
PM  EMAIL  GALLERY  Attn:RR
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

Ya.. I miss the one I had access to. So.. well.. i.am a starting to look to purchase...

Michael J Zaborowski

01-02-2017 12:38 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

Stan,

The tail boom is crooked.. and I like this machine SO MUCH it warrants repair or replacement. The belly pan gets attached tonight and then we can start stripping paint to see what can be done with the boom. I will look it over closely and if its not worth fixing I will ATTEMPT to get a new from ECV..

should not be long before it starts to look like a heli again!

Grim

Michael J Zaborowski

01-03-2017 02:07 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

not going as smooth as Stan or Peters builds but going well just the same. Got the paint stripped and will be replacing the boom. Making my own tail drive (cable).. again square drive .187" cable.

Grim

https://michaelzaborowski.smugmug.com/Bell-212/

Michael J Zaborowski

01-26-2017 02:27 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
doorman

rrProfessor

Sherwood, Arkansas

My Posts: All  Forum  Topic

Hang In There!!

I know that is going to be a show stopper when your done...

Stan

AMA 2918-Team JR, Spin Blades, East Coast Scale Helicopter,Castle Creations

01-27-2017 02:27 AM
PM  EMAIL  GALLERY  Attn:RR
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

Thanks Champ.. Making more progress on the tail drive.

Grim

Michael J Zaborowski

01-29-2017 12:27 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

making headway.

Made a cargo hook and a new spacer for the motor plate.

Lots to go.

Grim

https://michaelzaborowski.smugmug.com/Bell-212/

Michael J Zaborowski

02-12-2017 01:14 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Mojave

Elite Veteran

Palos Verdes, Ca. USA

My Posts: All  Forum  Topic

The rebuild is looking great! I like your cargo hook too.
Barry

All helis and planes have an expiration date stamped on them...you only find it after you crash!!

02-12-2017 01:40 AM
PM  EMAIL  GALLERY  Attn:RR
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

Thank you.. I am very happy with the rebuild so far.. I am now starting to work on the Fast Fin mod.. I am going to make a set of plugs from hard wood and vacuum form two halves.

I made a set of front skid steps for the gear from G-10. Kind of slick in the end. I also wanted to cover up the landing gear bow bolts so I made a set of clamp like covers for the bolts out of delron.

Anyway.. more to come

Just about ready to order the motor controller and batteries.

I hope others are getting some ideas from the pics for there builds.

Grim

Michael J Zaborowski

02-12-2017 01:50 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

well.. this is going OK.. The Fast Fin is coming along well. I can tell I missed the shape just a tick but its not bad..

More work to go but its a FAR cry better..

Grim

Michael J Zaborowski

02-14-2017 12:25 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH  3 pages [ <<    <     1      2     ( 3 )    >    >> ] 3306 views POST REPLY
Scorpion Power Hitec RCD
HelicopterScale Model RC Helicopters › Vario Bell 212
 Print TOPIC Advertisers 

 8  Topic Subscribe

Wednesday, March 29 - 8:13 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies