RunRyder RC
 8  Topic Subscribe
WATCH
 1 page 1114 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsBeastX › It won't go back to spektrum
10-24-2016 12:01 AM  13 months agoPost 1
DemetriusUSN

rrVeteran

Virginia Beach, Va​USA

My Posts: All  Forum  Topic

I have a v3 Beastx that won't get out of sbus mode or receiver type. I hold the button down while powering the unit on as it says in the book. When I follow the steps in chapter 4 many, many, many times, choosing purple and quickly pushing the button. Letters h-n just light up, not all at once. The light goes up and down.....forever. So am I missing anything

Minicopter Diabolo 700,Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-24-2016 12:19 AM  13 months agoPost 2
CoachE

rrApprentice

Cincinnati, ohio​-usa

My Posts: All  Forum  Topic

are you 100% sure you are doing this?

To get into the receiver menu press the button on the MICROBEAST and hold it down while you turn on the receiver power supply. The yellow menu LED A should now be flashing and you can release the button.

In order to change the type of receiver, press and hold the button for about 2 seconds. The Status-LED will light in the next color or eventually flash. Repeat this as many times as required until the Status-LED matches your receiver type:

Team JR / Get !T - Got !T - Perfect !T

PM  EMAIL  GALLERY  BLOGAttn:RR  Quote
10-24-2016 12:27 AM  13 months agoPost 3
Pistol Pete

rrProfessor

Seffner, FL

My Posts: All  Forum  Topic

Have you tried resetting unit?

https://rc.runryder.com/helicopter/...2/?p=6614613#RR

~~Enjoying the hobby one flight at a time~~

PM  EMAIL  HOMEPAGE  GALLERY  BLOGAttn:RR  Quote
10-24-2016 12:59 AM  13 months agoPost 4
DemetriusUSN

rrVeteran

Virginia Beach, Va​USA

My Posts: All  Forum  Topic

To reset it, you have to be in a menu option and my lights h-n are just flashing, so I don't know what I can do know.

Minicopter Diabolo 700,Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-24-2016 04:32 AM  13 months agoPost 5
DennisH

rrApprentice

Baton Rouge​Louisiana USA

My Posts: All  Forum  Topic

Demetrius, When you find out, let me know.

I have one, an AR7200, it was working fine. Then NO BIND. I have tried everything in the book, plus sought assistance here, plus called Horizon, and I am in the same shape you are.

YES, my lights also just go up and down. I have tried everything, I don't know how many hours I put in the 7200.

I now have a Skookum sitting on my 700.

Horizon said send it to them. I might do this later.

Dennis

PS: I have tried everything stated in this thread.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-10-2016 02:42 PM  12 months agoPost 6
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Letters h-n just light up, not all at once. The light goes up and down.....forever. So am I missing anything
Ah I see so like Night Rider style like it's waiting to initialize?

It sounds like it's simply waiting for a signal from your TX so it can connect? At that point try the bind process.

Make sure your TX is set to DSMX (if using DSMX Rx) and that it is a few feet away from the Rx, not too close when binding.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-11-2016 03:39 AM  12 months agoPost 7
DennisH

rrApprentice

Baton Rouge​Louisiana USA

My Posts: All  Forum  Topic

Richard,

I believe I have been through more than Demetrius with mine. After a 20 minute conversation with Horizon, they advised me to send it in.

I know I have tried everything, from this forum, fellow pilots with the same AR7200, and Horizon following every instruction given sometimes three times.

After two weeks of headaches I gave up.

Dennis
It sounds like it's simply waiting for a signal from your TX so it can connect? At that point try the bind process
We even tried resetting the AR7200 from scratch. ????

PM  EMAIL  GALLERY  Attn:RR  Quote
11-11-2016 04:00 AM  12 months agoPost 8
Heli Fanatix

rrVeteran

Fountain Valley, CA

My Posts: All  Forum  Topic

Part of the hobby
- have a spare FBL that is known good
- do what you can
- if it doesn't cooperate after several solid attempts
- send it in
- pull out and use the back up unit
- go fly!
- No Stress ... that is recipe for ENJOYMENT in this hobby

- Scott

PM  EMAIL  GALLERY  Attn:RR  Quote
11-14-2016 02:41 AM  12 months agoPost 9
rocket_33

rrElite Veteran

Mount Pleasant,​Michigan USA

My Posts: All  Forum  Topic

Just use the BeastX software and USB adapter....easy to set up using a computer

PM  EMAIL  GALLERY  Attn:RR  Quote
11-14-2016 11:58 AM  12 months agoPost 10
DemetriusUSN

rrVeteran

Virginia Beach, Va​USA

My Posts: All  Forum  Topic

Rocket 33, good idea, thanks.

Minicopter Diabolo 700,Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-15-2016 04:58 AM  12 months agoPost 11
DennisH

rrApprentice

Baton Rouge​Louisiana USA

My Posts: All  Forum  Topic

Rocket,

I have the USB cable. When trying to download the software, Horizon directs you to a German website. I never succeeded when trying to download the software.

Any suggestions? This is the only procedure I have not tried, strictly due to the software download.

Dennis

PM  EMAIL  GALLERY  Attn:RR  Quote
12-14-2016 01:13 PM  11 months agoPost 12
bunnywithdrum

rrNovice

HARTFORD,​CONNECTICUT

My Posts: All  Forum  Topic

studiox is really nice tight software---works well

once you use a few times and so easy....

2cents gone

(\__/)
(='.'=)
(") (")
BUNNYWITHDRUM ( i ain't no stinkin novice---23 years in!)

PM  EMAIL  GALLERY  Attn:RR  Quote
12-30-2016 12:55 AM  10 months agoPost 13
DemetriusUSN

rrVeteran

Virginia Beach, Va​USA

My Posts: All  Forum  Topic

Okay, I just plugged a rx pack directly into the beastx and it worked fine. I'm not sure why all of a sudden it,maybe I wasn't pointing my toes north south or something. But it's all good....

Minicopter Diabolo 700,Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-30-2016 04:15 AM  10 months agoPost 14
DennisH

rrApprentice

Baton Rouge​Louisiana USA

My Posts: All  Forum  Topic

Demetrius, ????? , So does it now work in the Heli?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-30-2016 09:14 AM  10 months agoPost 15
DemetriusUSN

rrVeteran

Virginia Beach, Va​USA

My Posts: All  Forum  Topic

Yes, it's on my 570.

Minicopter Diabolo 700,Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1114 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsBeastX › It won't go back to spektrum
 Print TOPIC  Make Suggestion 

 8  Topic Subscribe

Sunday, November 19 - 8:03 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online