RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 438 views POST REPLY
Scorpion Power ProModeler
HelicopterFlybarless Rotor Head SystemsFutaba CGY › CGY Governor + Scorpion
08-11-2016 06:37 AM  11 months agoPost 1
TomasLundberg

Senior Heliman

Piteå, Sweden

My Posts: All  Forum  Topic

Does the governor in cgy 750 work well with Scorpion 160A esc?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
08-12-2016 04:38 AM  11 months agoPost 2
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

I don't think it plays well when you try to use the 750 governor. One of my Synergy team mates could not get the esc to arm when it was paired with the 750. Someone correct me if I'm mistaken here.

Ben Minor

Team Synergy Team Futaba Team Kontronik USA
Progressive RC

PM  EMAIL  GALLERY  Attn:RR
08-12-2016 08:30 AM  11 months agoPost 3
TomasLundberg

Senior Heliman

Piteå, Sweden

My Posts: All  Forum  Topic

Thanks Dr.Ben! There seems to be no softstart also when using the 750 governor

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
08-12-2016 03:32 PM  11 months agoPost 4
don s

Key Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

There seems to be no softstart also when using the 750 governor
correct

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

PM  EMAIL  GALLERY  Attn:RR
08-13-2016 05:56 AM  11 months agoPost 5
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

The 750 uses the soft start of the esc. It works well with Helijive, Castle Creations, and Hobbywing.

Ben Minor

Team Synergy Team Futaba Team Kontronik USA
Progressive RC

PM  EMAIL  GALLERY  Attn:RR
08-14-2016 02:56 AM  11 months agoPost 6
don s

Key Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

I could never get soft start to work. I also couldn't get the rpm to work either so its probably me.

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

PM  EMAIL  GALLERY  Attn:RR
08-27-2016 08:23 PM  11 months agoPost 7
smittylube

Veteran

Santa Cruz, CA

My Posts: All  Forum  Topic

I found using the CGY gov and the Scorpion 130 commander it does have a 'harder' or faster start than my Vbars. Originally I had a T curve of 0/89/89/89/89 from the Vbar settings- that spun it around 180 on spoolup. totally unacceptable. I found it helped a ton to have a throttle curve in normal of 0/25/50/50/50 and have the gov start at 40%. I found then the blades were very close to 0 pitch when spooling up, which I like, and with soft start selected in both- I think I was at 15 in the CGY, it became very acceptable. I am very impressed in the CGY gov with the Scorpion. Opto sensor as well.
hope this helps someone

RPM is your friend..................................until you crash

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
08-27-2016 08:25 PM  11 months agoPost 8
smittylube

Veteran

Santa Cruz, CA

My Posts: All  Forum  Topic

Also when I was playing around with it initially I could see the governed rpms when spooled up no blades. That for some reason stopped working and it showed like 2000 2050 rpms. I became frustrated and tried flying it and it flew perfect holding the set desired HS from the radio.

RPM is your friend..................................until you crash

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 438 views POST REPLY
Scorpion Power ProModeler
HelicopterFlybarless Rotor Head SystemsFutaba CGY › CGY Governor + Scorpion
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, July 27 - 5:41 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online