Up for sale. I have a Trex 700 nitro DFC Version with the black gears and main black helical gear. I bought this heli off another member on another forum site. I have only hovered it a few times to work out the bugs and get it to my liking. Never did 3d with it yet. I had servo heating issues and think the heat is coming from the head dampeners being worn out causing vibration and servo heat. I have new head dampeners and sleeves for the head just not installed yet. I took the beastx unit off the 700 and put it on the 500. Works great so this leads me to assume it's the worn out dampeners. (Yes they are worn and need replacing and I have new ones)
**No receiver battery or receiver included in either models!
Sorry for the pics being out of order.
Trex 700 DFC
-OS 105 hzr regulated with a complete rebuild. Not broken in yet. Everything is new in this engine except carb and backplate.
-cyclic servos: JR 8917HV
-Tail servo: Savox 2272HV
-Throttle servo: Spektrum H6200HV
-gryphon auto booster
-edge main blades
-align tail blades
-some spares included
-OS Bubbleless clunk
-some scratches and dings from original owner. But nothing to stress over. One DFC pitch arm on top has a ding and scratch also.
**Your choice of Spartan vortex FBL unit w/ internal gov
-beastx plus FBL unit w/ internal gov.
Trex 500esp belt drive setup on 6s
-this heli has been rock solid with the beastx plus.
-stock align motor and esc
-cyclic servos: align ds515
-tail servo: futaba 9257
-edge main blades
-night main blades
-kbdd tail blades
-3 canopies. One in not so good shape other two pretty decent.
Trex 700 and 500----$1200 choose your FBL units
Trex 700 only----$1000 choose your FBL unit
Trex 700 only w electronics but no engine----$700
Trex 700 w electronics but no engine or FBL unit----$600
This is only way to part out for now. FBL unit will not be attached to airframe but included if specified.
Trex 500 $350 (currently have beastx plus) attached.
Trex 500 w no FBL unit $250
You cover PayPal fees / I cover shipping.
HeliDirect Field Rep, Synergy N7 w/ OS 105, Torq Servos, Cyclone/ Rail blades