RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 307 views
HelicopterClassifieds - Trade WantedOther Sold  flybar for ergo 60 ISO
03-08-2016 02:16 PM  21 months agoPost 1
allns47

rrKey Veteran

Richmond IN.

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

tryng to locate,,,,,could I use any 4mm flybar rod,,

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2016 03:16 PM  21 months agoPost 2
BeltFedBrowning

rrKey Veteran

Kansas City

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

I have mixed and matched flybars for many of my helicopters. I even used a Predator head on one of my JR gassers! The important part is the length. If you are using aftermarket paddles, You can use just about any flybar in the right diameter.
4mm x 530mm? Am I correct?

perfer et obdura; dolor hic tibi proderit olim

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2016 05:11 PM  21 months agoPost 3
allns47

rrKey Veteran

Richmond IN.

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

flybar

that's what I was think in....I have a 4x530 fly bar but was concerned there is not flat spots on the bar I have for the mixing arm to tighten up to?

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2016 05:17 PM  21 months agoPost 4
BeltFedBrowning

rrKey Veteran

Kansas City

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

If you are using the aluminum arms, you don't need the flat spots. You just have to eyeball them when you install.

JR flybars are pretty soft, so get the arms level before you tighten the set screws because the set screws will mark up the flybar and make it difficult to reposition the arm. Every time you tighten the set screw, it wants to pop back into the groove that it made in the flybar.

perfer et obdura; dolor hic tibi proderit olim

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2016 06:25 PM  21 months agoPost 5
allns47

rrKey Veteran

Richmond IN.

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

ok thanks,,that was my main concern

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 307 views
HelicopterClassifieds - Trade WantedOther Sold  flybar for ergo 60 ISO
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Classifieds › HELP-FAQ
Attention buyers! For sellers to Add Classified Feedback you need to Post Reply in the seller’s topic thus creating the green feedback link.
Stating price is not mandatory but recommended. Complaining about price or complaining about pre-sale negotiations is inappropriate and against policy.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Friday, December 15 - 12:18 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online