RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 963 views TOPIC CLOSED
Scorpion Power Scorpion Power
Helicopter
e-
SAB
Goblin 700 › Goblin 700 3 blade head
12-16-2015 12:39 PM  22 months agoPost 1
DemetriusUSN

rrVeteran

Virginia Beach, Va USA

My Posts: All  Forum  Topic

With the 3 blade head, do you have to use the SAB blade set or can you use 3 blades of the same manufacturer, same weight and same length??

Minicopter Diabolo 700,Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
12-16-2015 01:13 PM  22 months agoPost 2
Blackhawk6

rrVeteran

Livonia, Mi

My Posts: All  Forum  Topic

Ive wondered this same question but found that you can't just slap on any 3 blades that weigh the same as the 3D sets of 3 are manufactured lighter for the added weight of an extra blade. Right now there's only 3 brands to work with that come in sets which are SAB, Helix and Zeal. I'm sure over time, as this fad sticks, more will offer sets of 3 to give more options. Hope this helps!

PM  EMAIL  GALLERY  Attn:RR
12-16-2015 02:48 PM  22 months agoPost 3
DemetriusUSN

rrVeteran

Virginia Beach, Va USA

My Posts: All  Forum  Topic

I looked at the weight of the 3 blade set from Zeal and they are 193.3, so I will weight the ones I have and see. If they are more I will get a set of Zeals, thanks.

Minicopter Diabolo 700,Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
12-28-2015 02:13 PM  21 months agoPost 4
Dwight

rrApprentice

West Chicago, IL

My Posts: All  Forum  Topic

I have flown 3 blade machines for over a year and have matched up 2 blade sets with a 3rd blade. The only reason this is not so practical is you need 2 sets of blades to make 1. They work fine as long as they have the same weight and balance. That is mostly what the blade manufacturers are doing anyway. The only difference is the new F3C version that have a thinner chord and width.

PM  EMAIL  GALLERY  Attn:RR
01-25-2016 11:21 PM  20 months agoPost 5
airboss

rrElite Veteran

OC ,california

My Posts: All  Forum  Topic

I have been using 2 blade sets and 3 blade sets , all have worked fine on tail and mains.

Urukay HPS3 KSE 700 HPS3

PM  EMAIL  GALLERY  Attn:RR
04-13-2016 03:21 PM  18 months agoPost 6
da_man

rrKey Veteran

Central NC

My Posts: All  Forum  Topic

3 blades for a 2 blade head will definitely work, no question about that. According to the engineering , these blades will have a reduction in efficiency ( figure of merit) than those specifically designed for 3 blade heads. I know one difference is in the width of the chord.

PM  EMAIL  GALLERY  Attn:RR
04-13-2016 03:30 PM  18 months agoPost 7
vburge

rrApprentice

Alabaster, Alabama - US

My Posts: All  Forum  Topic

Xblades and DH make some three blade sets, but they may not be easy to get in the US. You may can get http://www.peakaircraft.com/ to order them because they carry both brands.

http://www.beastx.com/eng/xblades.php

http://www.world-of-heli.de/rotorbl...rotorblaet.html

Chronos 700
Trioblin 570
Vbar Control
Xnova Field Rep - Compass Model Field Rep

PM  EMAIL  Attn:RR
04-13-2016 03:43 PM  18 months agoPost 8
DemetriusUSN

rrVeteran

Virginia Beach, Va USA

My Posts: All  Forum  Topic

I went ahead and purchased the 3 blade tail but thanks for all the input.

Minicopter Diabolo 700,Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 963 views TOPIC CLOSED
Scorpion Power Scorpion Power
Helicopter
e-
SAB
Goblin 700 › Goblin 700 3 blade head
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Monday, October 16 - 11:15 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online