I think this is a great review!!! Attached is the pdf of the review. Please note some things.
The reviewer had the helicopter for about a year before the review was published.
The review is for an older DT700V2.
The reviewer missed the adjustable bevel gear mesh of the front tail drive bevel gears.
The spindle on the V2 is 8mm vs 10mm. This was done as a weight reduction measure.
Because the reviewer's unit was older, there is no mention of the changes made in the helicopter in the last year. Some of those changes are: A.The frame, head, and tail come loosely assembled so remove each screw, clean, then reinstall with thread locker. B. The boom and torque tube are shorter. C.There are helical cut bevel gears for both the front and rear tail drives. D.. The Grandioso (new canopy, painted boom) was not mentioned. E. The quick change, forked tail block was not really mentioned (The front quick change tail drive gears were mentioned, so missing the adjustable mesh, is odd.)
Again, I think this is a wonderful review and we thank RC Heli Pilot for publishing the review! It helps us get the word out to the masses that there is a kid on the block with some new tricks!https://rc.runryder.com/helicopter/...art_tin_700.pdf
Team Compass USA - Team Pilot, Spartan Vortex,Team Scorpion,Team KBDD