RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 495 views
HelicopterFlybarless Rotor Head SystemsAlign GPro › Swash plate does not remain level
09-29-2015 11:20 AM  26 months agoPost 1
French_Heli

rrNovice

Saint Amour France

My Posts: All  Forum  Topic

I have two problems with the Gpro.
1) I can level the swash plate at the mid point with 0degrees and at the max and min point with + and -12 degrees. However in between the the mid point and the max and min point the elevator moves. I have checked the servo travels and only the collective pitch moves so the signals for the elevator are generated by the Gpro. The lateral leveling remains flat.
The other problem is the governor, I cannot see the LED go out nwhen the magnet passes the sensor. I have even a spare sensor and magnets but there is apparently no signal although the governor is on and the throttle >30%
Any ideas welcome
Cheers Bev.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-29-2015 01:06 PM  26 months agoPost 2
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

Servo behavior on a FBL heli sitting still on the ground generally doesn't worry me as long as the movement itself is correct with respect to the stick. The controller sees no reason to correct the movement as it sees no motion.

As for the governor, what sensor do you have?

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 495 views
HelicopterFlybarless Rotor Head SystemsAlign GPro › Swash plate does not remain level
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, December 14 - 4:25 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online