RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 471 views POST REPLY
HelicopterAlignT-REX 600N › 600N with RJX Head and Newer Autogear and Main Shaft Hub Question
06-27-2015 03:18 PM  35 months agoPost 1
ben_beyer

rrApprentice

Canyon, TX

My Posts: All  Forum  Topic

A few weeks ago, I cracked the autorotation gear on my 600N LE that I had converted to FBL using the RJX head. With the new Main Shaft Hub and newer Autorotation gear (H60020A), I had about 2-2.5mm of up and down play in the main shaft. To remove it, I just loosed the set screws on the main shaft collar, lifted up on the shaft, and re-tightened the set screws. I am going to go back through to get everything back to the proper pitch angles since the main shaft is now a little bit higher.

Do I need to change anything else or get a different main shaft before I fly?

http://www.rctodayshow.com/forum/do...=3155&mode=view

PM  EMAIL  GALLERY  Attn:RR  Quote
06-27-2015 06:26 PM  35 months agoPost 2
ben_beyer

rrApprentice

Canyon, TX

My Posts: All  Forum  Topic

Well this may be a promising upgrade. I bought the SOKO virtual main shaft this morning and went back through the set up. Some minor adjustments were needed for leveling the swash and when I put in my desired pitch values, I only had to turn in the ball links going to main blade grips a single turn and I am now able to get equal travel up and down where I think I had a little more down than up before (it's been over a year since I got the SOKO kit).

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 471 views POST REPLY
HelicopterAlignT-REX 600N › 600N with RJX Head and Newer Autogear and Main Shaft Hub Question
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, May 21 - 10:18 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online