RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 1304 views POST REPLY
HelicopterSynergy R/CSynergy N7 › Synergy N7/VBAR NEO with Sensor Wiring
06-24-2015 02:46 AM  35 months agoPost 1
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

A lot of people were wondering how to wire the Synergy N7 with the VBAR NEO and extra sensor without using the rear tray. Most were concerned with the extra oil and mess getting on the electronics. Well this is what I came up with:
First I made a new CF plate for the NEO out of scrap CF just big enough to fit the NEO. Then I used the original tray as well and made a sandwich out of the mounting braces so the NEO is on the top and the extra sensor is on the bottom. Then I adjusted my wiring to suit...here are my pics:


I will finish the setup and get some flight reports soon. Hope this helps!.....Ron

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-24-2015 03:49 AM  35 months agoPost 2
dbcaster

rrApprentice

Petaluma, Ca

My Posts: All  Forum  Topic

It will be interesting to see how it works out. I tried the Neo without the extra sensor on my n7 with not so good results. The heli flew fine in normal flight but not so good with the rescue. I don't have any oil or fuel on the rear deck after a flight so I may try a sensor there.

Some arguments are sound and nothing more

PM  EMAIL  GALLERY  Attn:RR  Quote
06-25-2015 03:29 AM  35 months agoPost 3
Kevin Feil

rrVeteran

Newnan, Georgia, USA

My Posts: All  Forum  Topic

Great idea MBFAM. Glad to see you enjoying the N7

K

PM  EMAIL  GALLERY  Attn:RR  Quote
06-25-2015 07:26 AM  35 months agoPost 4
mjburberry

rrNovice

Atlanta, GA

My Posts: All  Forum  Topic

Glad to see that worked out with the extra sensor plate.

I had recommended this a while back over on the Synergy forums without having tried it (Don't fly the NEO)... So good to see it works out.

Mark

Flight Teams: Synergy; OptiPower; Scorpion; Morgan Fuel

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1304 views POST REPLY
HelicopterSynergy R/CSynergy N7 › Synergy N7/VBAR NEO with Sensor Wiring
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Monday, May 28 - 6:32 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online