RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 657 views POST REPLY
Helicopter
e-
Blade
Blade 450 › Head Speed
06-22-2015 10:29 PM  35 months agoPost 1
FLYERCLD

rrVeteran

Proctor, Arkansas

My Posts: All  Forum  Topic

What's A good head speed for 3d on a 450X, motor is a Viper 3500KV,
My ECS is a Talon 35, pinion 14T, main gear tooth I think is 140, mag pole 6

Normal 2525
Idle1 2550
Idle2 2550
I know 1&2 needs to be higher, but what head speed?

Thanks,
Charles

MA Whiplash Nitro
Avant Aurora X2
OS 91 HZ
YS120
VBAR BlueLine
DX18
AMA L504443

PM  EMAIL  GALLERY  Attn:RR  Quote
06-22-2015 11:36 PM  35 months agoPost 2
Dawiev

rrApprentice

Middle East

My Posts: All  Forum  Topic

Hi, I run a slightly different setup, but it is happy and snappy at 3,500.

With or without gov ? According to Mr Mel's HS Calculator (http://heli.dacsa.net/calcv3/Default.aspx) it makes a few hundred difference.

PM  EMAIL  Attn:RR  Quote
06-23-2015 01:02 AM  35 months agoPost 3
Heli Fanatix

rrVeteran

Fountain Valley, CA

My Posts: All  Forum  Topic

FLYERCLD.... HS are lower than most heli's swinging 425mm manufacturer's recommended.

I was able to do piroflips and 8pt Tic Tocs @ 3200 HS on my 450X with 325mm FB blades on 3S, but you gotta finesse the controls. No stick banging or else the motor will talk back to you.

- Scott

PM  EMAIL  GALLERY  Attn:RR  Quote
06-24-2015 02:33 PM  35 months agoPost 4
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

It depends which Blade 450? Usually between 3000 and 3500 for 3D. Consider dropping a pinion size for longer flight times as your gearing is quite steep at the moment even if you bumped upto 3000.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 657 views POST REPLY
Helicopter
e-
Blade
Blade 450 › Head Speed
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, May 22 - 11:21 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online