RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 394 views POST REPLY
HelicopterMain Discussion › Program Mix
04-09-2015 10:19 PM  35 months agoPost 1
jtdesert

rrNovice

Kremmling CO USA

My Posts: All  Forum  Topic

Does anyone use rudder to throttle mix (Dx6i)(Swift NX) for pirouettes in a stationary hover to compensate for tail rotor torque and at what percentage would be good to start?

PM  EMAIL  Attn:RR  Quote
04-10-2015 05:40 AM  35 months agoPost 2
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

Are you using the internal governor with your esc?

Ben Minor

Team Synergy Team Futaba Team Kontronik USA
Progressive RC

PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2015 07:13 PM  35 months agoPost 3
Rafael23cc

rrKey Veteran

Junction City, KS

My Posts: All  Forum  Topic

On my nitros, before i got a governor, i used to have a cyclic to throttle and rudder to throttle mix. After i got a governor, i zeroed all that stuff out.

If i remember correctly, I had around 5 to 10%. Its a lot easier on a nitro to program, because you can see how much the throttle arm moves.

Rafael

Keep your feet on the ground, but your eyes on the sky.
Team Heliproz.com

PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2015 07:46 PM  35 months agoPost 4
jtdesert

rrNovice

Kremmling CO USA

My Posts: All  Forum  Topic

No only program features are start (soft),battery,cutoff mode, cutoff threshold, timing on ESC (default). Maybe don't need program mix on electric maybe this is only for nitros?

PM  EMAIL  Attn:RR  Quote
04-10-2015 11:39 PM  35 months agoPost 5
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

only for nitros?
correct from back in the day before gyros

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-11-2015 12:44 AM  35 months agoPost 6
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

huh???

Makes no difference whether it's a nitro model or electric. If the drive system is not governed, headspeed with drop a touch with rudder input against torque versus with torque. The better option to mimimize programming complexity is to simply use either the internal esc governor or an external governor.

Ben Minor

Team Synergy Team Futaba Team Kontronik USA
Progressive RC

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 394 views POST REPLY
HelicopterMain Discussion › Program Mix
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, February 25 - 8:04 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online