I am selling the set of (3) BK Servo DS-5001HV mini cyclic servos
out of my Goblin 500.
I know servos are very mechanical items, which undergo wear and tear, and I did not want anyone to have issues with them. So I went ahead and re-built all three servos with 100% brand new genuine BK Servo metal gears and bearings. Did NOT use the aftermarket "cheapie" gears, as they have a slightly different gear ratio which affects performance.
Thoroughly cleaned all servos, installed new gears/bearings, lubricated, and ran 1,000 60-degree cycles through each servo to break in the new gears & lube.
I am going to leave the carbon/graphite arms on the servos with the SAB ball links, as you see in the photo.
Also, the servo leads are cut and re-terminated to the proper length for installation into a Goblin 500 with a FBL system where the connections face forward. Please see how neat the wiring is in the last photo. I did leave a little extra length on each wire as a "service loop".
But this is important, I recommend you do NOT purchase these servos for anything other than a Goblin 500, as the leads have been shortened for that specific heli, and I cannot guarantee that they will fit other airframes.
I am selling all three servos for $190 with *FREE* shipping
within the CONUS.
Here are some photos of the re-build and break-in process, along with a couple old photos showing how the wiring works out on a Goblin 500: