RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 588 views POST REPLY
Scorpion Power ProModeler
12-18-2003 10:43 AM  13 years agoPost 1
2Dog

Heliman

Cleveland, Ohio

My Posts: All  Forum  Topic

Hi,
Could someone out there please give me a quick rundown on tail setup for the 60 expet. I'm not realy sure if I have it going the correct direction off the servo. For nose to the right the servo should move counter clockwise? The servo is mounted in the stock location on the frame in the 4 th spot from the top. I looked thru the manual and they do not give a clear setup on the tial as far as servo direction is concerned.
Thanks,
2Dog

PM  EMAIL  GALLERY  Attn:RR
12-18-2003 12:03 PM  13 years agoPost 2
Peefor

Veteran

Norfolk UK

My Posts: All  Forum  Topic

2

The advice I was given :

Identify your forward going tail rotor blade, i.e. the one that travels up through the rotor disk. Bend this blade at 90 degrees so it points out the back like a boat's rudder.

Move your Tx stick for right movement of heli. The tail blade should move to the right, so if the heli was a boat it would go right. Check the gyro the same way. Move nose of heli to the left, and the gyro should move the blade right.

Pete

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 588 views POST REPLY
Scorpion Power ProModeler
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, August 22 - 11:52 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online