RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 559 views POST REPLY
Scorpion Power Scorpion Power
HelicopterGasser Model RC HelicoptersOther › ok need help today.......
02-22-2014 06:10 PM  3 years agoPost 1
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

My Posts: All  Forum  Topic

on page 38 it shows these on the lower main shaft in book....i dont have, and it spun fine.....so do i need, 10x18x5.5 THRUST BEARING (1pc)
Part# CNBB1018T...trying to rebuild today....need help

PM  EMAIL  GALLERY  Attn:RR  Quote
02-22-2014 06:24 PM  3 years agoPost 2
mcfast

rrKey Veteran

Quebec Quebec Canada

My Posts: All  Forum  Topic

Not all had the thrust bearing, I think it was std on the SE only.

P.S. sorry for the spelling or the grammar I am dyslexic!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-22-2014 06:26 PM  3 years agoPost 3
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

My Posts: All  Forum  Topic

and a "B" number ?????????page 38

so you think go ahead and put back together......the other thing is the brass bushing.....on sam page says "B" it dont tell you what it is
thanks for any help

PM  EMAIL  GALLERY  Attn:RR  Quote
02-22-2014 06:47 PM  3 years agoPost 4
mcfast

rrKey Veteran

Quebec Quebec Canada

My Posts: All  Forum  Topic

I do not have the same manual as you do, I would put it back together the way it was and go fly.

This is the manual I got.

http://www.centuryhelimedia.com/Man..._Manual-WEB.pdf

I think you got this one.

http://www.centuryhelimedia.com/Man...2_FINAL1.01.pdf

Is yours a V2 ?

P.S. sorry for the spelling or the grammar I am dyslexic!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-22-2014 08:11 PM  3 years agoPost 5
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

My Posts: All  Forum  Topic

i dont know , how do i tell if its a v2

the manual just says nx......so im not sure how to tell, the guy i boght it from said it was a v2......so now i dont really know ???

PM  EMAIL  GALLERY  Attn:RR  Quote
02-22-2014 08:17 PM  3 years agoPost 6
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

My Posts: All  Forum  Topic

??????? still putting it together......almost done

your manual has alumiun frame adn swash is different, bt alot looks the same.....but thanks i will print that up to....its got more detail.....but my frame is a black plastic......but not carbon fiber

PM  EMAIL  GALLERY  Attn:RR  Quote
02-22-2014 08:41 PM  3 years agoPost 7
jackp332

rrKey Veteran

Claremont, Nh USA

My Posts: All  Forum  Topic

I believe the V2 NX was available with the standard G10 frames and Carbon frames.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 01:06 AM  3 years agoPost 8
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

My Posts: All  Forum  Topic

thanks guys

thanks guys....all back together,,,,,,could you send me some warm weather...thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 01:30 AM  3 years agoPost 9
chris6414

rrApprentice

Sneads Ferry, NC USA

My Posts: All  Forum  Topic

Just cut you a hole in the thumbs of some knit gloves and richen up the LS needle and your flying.

Chris

Century Hawk Sport, OS .32, Futaba 7C, GY-601 9251
Predator Gasser SE G-23, Fut 3010 servos, JR gyro/servo

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 03:45 AM  3 years agoPost 10
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

My Posts: All  Forum  Topic

inspection went well

Watch at YouTube

now back together

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 01:07 PM  3 years agoPost 11
chris6414

rrApprentice

Sneads Ferry, NC USA

My Posts: All  Forum  Topic

As was already mentioned. Don't forget to check and re-grease those thrust bearings in the grips? I just did mine and found other tail issues that were being masked by a binding tail.

Chris

Century Hawk Sport, OS .32, Futaba 7C, GY-601 9251
Predator Gasser SE G-23, Fut 3010 servos, JR gyro/servo

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 559 views POST REPLY
Scorpion Power Scorpion Power
HelicopterGasser Model RC HelicoptersOther › ok need help today.......
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, October 20 - 8:07 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online