RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 1073 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › align 150
02-22-2014 05:41 PM  3 years agoPost 1
Southparkshane7

rrNovice

Twin falls ,idaho,usa

My Posts: All  Forum  Topic

Just bought a align 150 ....I have a futaba t9chp transmitter w spektrum dsm 2 2.4 module for radio ....will this work ....cant seem to get it to bind ....also if it does work what parameters do I use futaba or spectrum thank s for the advice

PM  EMAIL  Attn:RR  Quote
02-22-2014 07:39 PM  3 years agoPost 2
Dan Minick

rrKey Veteran

Columbus, WI

My Posts: All  Forum  Topic

looks to me like you need a Spektrum satellite. never seen or used one, but a quick Google search yielded this.
T-Rex 150 features built in Futaba S-FHSS 2.4Ghz system, and support the use of Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To get the T-Rex 150 airborne, all thats needed is inputting of parameters listed in manual into your transmitter, and binding of your transmitter.

Team Synergy, Team FBL Rotors-------if its not broke...it will be!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 02:16 AM  3 years agoPost 3
Southparkshane7

rrNovice

Twin falls ,idaho,usa

My Posts: All  Forum  Topic

I have one of those but cant get it to bind ive watched all the u tube videos on binding but im thinking because its a futaba radio w spektrum dsm2 mod it won't work idk?

PM  EMAIL  Attn:RR  Quote
02-23-2014 04:26 AM  3 years agoPost 4
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

Is your Futaba radio modulation parameter set to PPM mode for the model memory you're trying to use?

Do you have a full-Spektrum receiver (such as an AR7000 that you can plug your satellite into, and bind to your transmitter. If that works, you may then be able to unplug the satellite from the extra receiver, then install it in your 150. It's worth a shot.

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 01:16 PM  3 years agoPost 5
Dan Minick

rrKey Veteran

Columbus, WI

My Posts: All  Forum  Topic

another thing, where did you buy the Sat? I thought I was being smart a few months back and bought 6 Sats on Ebay for dirt cheap. they obviously were not genuine when i got them, couldn't make them work. luckily the seller was decent and let me send them back

Team Synergy, Team FBL Rotors-------if its not broke...it will be!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 07:23 PM  3 years agoPost 6
4 stroke flyer

rrApprentice

Dowagiac,MI

My Posts: All  Forum  Topic

I have the 10C and put a spectrum module in it and it would not work. I ended up buying a DX6I. I tried many different ways that were suggested with the spectrum module and none would work.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 07:28 PM  3 years agoPost 7
Southparkshane7

rrNovice

Twin falls ,idaho,usa

My Posts: All  Forum  Topic

So even the dxi 6 would not work ?I was thinking about buying one I have a dx5n it won't bind n neither will my futaba w the dsm2 I can't get eitger to bind

PM  EMAIL  Attn:RR  Quote
02-23-2014 07:29 PM  3 years agoPost 8
Southparkshane7

rrNovice

Twin falls ,idaho,usa

My Posts: All  Forum  Topic

I also tried binding it to 6000 receiver n putting it back in the t rex n still won't work

PM  EMAIL  Attn:RR  Quote
02-24-2014 12:57 AM  3 years agoPost 9
4 stroke flyer

rrApprentice

Dowagiac,MI

My Posts: All  Forum  Topic

yes the DX6I works. I flew mine on it today

PM  EMAIL  GALLERY  Attn:RR  Quote
02-24-2014 12:58 AM  3 years agoPost 10
Southparkshane7

rrNovice

Twin falls ,idaho,usa

My Posts: All  Forum  Topic

Thanks

PM  EMAIL  Attn:RR  Quote
02-25-2014 05:11 PM  3 years agoPost 11
Dee Flies 3D

rrApprentice

Farmington Hls, Mich - USA

My Posts: All  Forum  Topic

My Spectrum module in a Fut 10CHP has bound to any Spectrum I have. As prev. stated ~ Important in the Parameter menu to have PPM as the reciever setting, AND to pre-bind the Sat with a reciever before attaching to the port of whatever it's controlling...

EDIT - ALSO make sure you reverse the throttle, as it's opposite of Spectrum..

PM  EMAIL  GALLERY  Attn:RR  Quote
02-26-2014 02:09 AM  3 years agoPost 12
4 stroke flyer

rrApprentice

Dowagiac,MI

My Posts: All  Forum  Topic

My Spectrum module in a Fut 10CHP has bound to any Spectrum I have. As prev. stated ~ Important in the Parameter menu to have PPM as the reciever setting, AND to pre-bind the Sat with a reciever before attaching to the port of whatever it's controlling...
I tried this and could not get it to work. sure wish it had. I prefer my 10C over the DX6i

PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2014 01:33 AM  3 years agoPost 13
Southparkshane7

rrNovice

Twin falls ,idaho,usa

My Posts: All  Forum  Topic

Thanks I have done all this but sattellite just flashes orange when I put it on my align150 n the red light blinks n beeps on the align 150 idk I bound it to my ar7000 n it works fine im at astand still rt now

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1073 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › align 150
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Tuesday, October 24 - 8:54 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online