My orignal x5 cork screwed its way to death, instead of buying a new kit, since the head block was the only thing to survive including all electronics... I built a kit from new parts the way I wanted my x5 setup. The main drive behind this was I wanted the hkiii motor, x4 tail, formula canopy, upgraded swash and head, and slant gear. This thing flies like it is on rails it is set up perfectly!
this has savox 2272 on the tail 2271 on cyclic, hkiii 890 motor, stock gaui/hobbywing 100amp, currently using a flight pack and an rx pack. I have a sk-540 with a dmss sat. x7 pitch links, upgraded swash and head, frame stiffener/battery fence. There are 3 normal canopies all have imperfections especially the orginal x5 canopy from my first bird. The frame sides currently are fg with a couple spots where the paint is scratched, there is also a spot where I started to black out the orange with a sharpie and quit. I am including a set of CF frame sides that could easily be swapped if you did one side at a time. I am also including a lot of extra parts as seen in the pictures and a set of mavrikk g5 pro almost perfect condition, extra set of cf edge tails and a set of KBDD tails. The edge blades are in great condition they are blemishes that you will see there are imperfections but it is under the finish. The tail and stabilizer fins are fg that have been sanded and repainted to match the formula canopy. I have the original CF tail fin but not the stabilizer fin. I have two swash tools one you need to have the head off the other can slide in and be used fully assembled. I will throw in a hobbywing programming card. There is a set of original canopy mounts and then a set of rc booya mounts but I can't find one of the mounts that would go on the heli, it could be purchased. I have a spare edge blade but have no idea how it matches up with the two on it. One of the skids has a slight bend in from my recent move.
THE SK540 and sats are not included
I remembered this also has align TT bearings, an upgraded CF tail push rod, and high rigidity landing gear!!!!
All parts in images are included
$800 includes pp and shipping cont usa
i will seperate the servospictures