RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 299 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Electric Battery-Charger-pSupply
› Balance plug question
02-20-2014 11:34 PM  3 years agoPost 1
cessnapilot3

rrNovice

shelbyville, in

My Posts: All  Forum  Topic

Hi,
I have a Voltz 101K charger. It has a 10s JST-XH balance port. I want to parallel charge (with a paraboard) multiple 6s batteries. The paraboard has a 6s JST-HX balance plug. Its there any reason I can shave one of the "teets" off of the paraboard 6s plug, and plug it into the 10s female on the charger? or do I have to use an adapter board?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-21-2014 12:01 AM  3 years agoPost 2
DemetriusUSN

rrVeteran

Virginia Beach, Va USA

My Posts: All  Forum  Topic

I have the same charger, plug the 6s parallel cable into the 6s port on the 10s board abd charge. Depending on the size of packs you are charging is what you set the amperage to.So if you're charging 3,2200mah 3s lipo,you would set the charger to 6.60a to charge the 3 lipos at 1c.

Minicopter Diabolo 700,Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-21-2014 01:02 AM  3 years agoPost 3
Gregor99

rrElite Veteran

Western Wa

My Posts: All  Forum  Topic

Its there any reason I can shave one of the "teets" off of the paraboard 6s plug, and plug it into the 10s female on the charger?
Yes. Just be sure to cut off the correct side. Its the one on the positive side of the connectors. Line up the negative side of both connectors and it will become more obvious. There's no protection in the charger if you get it wrong. So check twice, cut once.

Revolectrix Beta Team

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 299 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Electric Battery-Charger-pSupply
› Balance plug question
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Saturday, October 21 - 10:21 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online