RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 763 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › Ultimate heli for Kontronic Drive
02-18-2014 01:52 PM  3 years agoPost 1
ZS-JAF

rrVeteran

Houston, TX

My Posts: All  Forum  Topic

I have a Pyro 800 48L Terminator and a Kosmik cool 160 on the way. I was planning on putting it on a Logo 700, but now have second thoughts. The options are limited for this motor set up. Logo 700/800 and Diabolo. Is there one that I am missing? What heli would you guys build? I wish there was a 800 size TDR.

I have a 3D heli, I don't understand why it doesn't do 3D

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 02:37 PM  3 years agoPost 2
Magnumeng

rrVeteran

29 Stumps, CA

My Posts: All  Forum  Topic

Email Jan at Henseleit and ask him about the options. I have seen 800 size TDR's.

http://henseleit-helicopters.de/

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 04:39 PM  3 years agoPost 3
ZS-JAF

rrVeteran

Houston, TX

My Posts: All  Forum  Topic

Great minds think alike I have already done that. I see there are different size tail booms for the TDR but this might be to much power for a stretched 800. If there was a 8mm pinion that might work for a beast of a 700. I am hoping there might be something new on the drawing board that someone knows about.

I have a 3D heli, I don't understand why it doesn't do 3D

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 05:27 PM  3 years agoPost 4
RyanW

rrKey Veteran

Edmond, Oklahoma

My Posts: All  Forum  Topic

I had that exact set up in my Logo 700 and it rocked!

You will be limited with the 8mm output shaft though.

I have the Pyro 750 in my TDR and it is tight with the frame braces from RMQ- which I highly recommend with the monster motor. I don't think the 800 would fit with that frame brace, but maybe with Jan's.

Honestly adding a ton of weight to the TDR is no fun. I put MKS X8 servos, Pyro 750 Competition and Cool Kosmik 200 and it is far from its intended weight range. If I swapped out the servos and went from 5000mAh to 4400mAh batteries it would be back where it needs to be.

Maybe the new Protos 800? Otherwise I would stick to the original plan with the Logo 700... the 800 is too big and heavy in my opinion to run on 12s, which I think is where you would be with that motor. You need 16s on the 800.

-Ryan
Mikado USA, Kontronik, Opti-Power, MKS Servos

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-18-2014 07:33 PM  3 years agoPost 5
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

Are you married to German brands?

Did the motor come from a US dealer that could swap you for a 400KV?

Find some video of Tom Erik Rolfson flying his Raptor E820 from IRCHA 2013 and see what that does for you.

Ben Minor

Team Synergy Team Futaba Team Kontronik USA
Progressive RC

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 07:52 PM  3 years agoPost 6
RyanW

rrKey Veteran

Edmond, Oklahoma

My Posts: All  Forum  Topic

Are you married to German brands?
I know this was addressed to the OP, but yes... yes I am!

-Kontronik
-Mikado
-TDR
-Robbe (R.I.P.)
-Porsche
-Mercedes
-Audi
-Wera Tools
-Fein Tools
-Metabo Tools
-Flex polishers

....should I continue?

-Ryan
Mikado USA, Kontronik, Opti-Power, MKS Servos

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-18-2014 08:02 PM  3 years agoPost 7
ZS-JAF

rrVeteran

Houston, TX

My Posts: All  Forum  Topic

I am a big fan of the German stuff. I have only owned Logos and Minicopter and really like both. As far as the 700 size goes the Logo 700 is my favorite due to it having a very locked in predictable feel. I took a look at the video of the 820 and it does look very nice but I just sold my second E720 a few months ago. I was looking at the Diabolo 800 and Triabolo but peaks right up says the 800 is over kill on both and I think they are geared a little more for sport/mild 3D. I did find a new heli on peaks website. Any one else seen or head of this thing?

http://www.peakaircraft.com/Product...pn=CHS4&pID=337

I have a 3D heli, I don't understand why it doesn't do 3D

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 08:52 PM  3 years agoPost 8
dumbthumb75

rrApprentice

Oslo, Norway

My Posts: All  Forum  Topic

Looks like it's the Swiss made Concept Sfour :

http://www.concept-helicopter.com/i...8ecb2501d8457e7

Diabolo, TDR, X50e, X50n, Raptor 50

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 09:08 PM  3 years agoPost 9
ZS-JAF

rrVeteran

Houston, TX

My Posts: All  Forum  Topic

Looks pretty minimalistic and light to me. We will have to see how it gets reviewed. I just found this video mostly speed runs.

Watch at YouTube

I have a 3D heli, I don't understand why it doesn't do 3D

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 763 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › Ultimate heli for Kontronic Drive
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, October 18 - 3:05 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online