RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 411 views POST REPLY
Scorpion Power Scorpion Power
02-18-2014 01:04 AM  3 years agoPost 1
BENTDABOOM

rrKey Veteran

west seattle

My Posts: All  Forum  Topic

We have a GY240 and Needing to ask how do ya lower the travel on the rudder servo,thiers no limit pot on the 240 gyro and I tried the ATV to no avail, also the D/R and nothing happened, JR 8103

CAUTION!!! politicians may be hazerdous to your well being

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 02:07 AM  3 years agoPost 2
JEEPWORLD2002/2

rrKey Veteran

Blue Bell, Pa

My Posts: All  Forum  Topic

I think the only way it to put a smaller servo horn or move the ball in closer to the center of the servo wheel/ horn

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 12:33 PM  3 years agoPost 3
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Yep, old school gyro setup

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 07:33 PM  3 years agoPost 4
BENTDABOOM

rrKey Veteran

west seattle

My Posts: All  Forum  Topic

[quote]Yep, old school gyro setup

you mean what jeepworld said? if so that still doesn't tell me why the ATV isn't working, just curious

CAUTION!!! politicians may be hazerdous to your well being

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2014 09:46 PM  3 years agoPost 5
dcasole

rrApprentice

Dacula GA

My Posts: All  Forum  Topic

ATV in a 401 and GY240 just control piro rate

Jeep world is correct that is the only way set the end point

PM  EMAIL  GALLERY  Attn:RR  Quote
02-19-2014 12:12 AM  3 years agoPost 6
BENTDABOOM

rrKey Veteran

west seattle

My Posts: All  Forum  Topic

ok will try that cuzz right now Im at 14 mil thanx

CAUTION!!! politicians may be hazerdous to your well being

PM  EMAIL  GALLERY  Attn:RR  Quote
02-19-2014 12:14 AM  3 years agoPost 7
Pistol Pete

rrProfessor

Seffner, FL

My Posts: All  Forum  Topic

PM  EMAIL  HOMEPAGE  GALLERY  BLOGAttn:RR  Quote
02-19-2014 12:20 AM  3 years agoPost 8
BENTDABOOM

rrKey Veteran

west seattle

My Posts: All  Forum  Topic

I got the manual just wasn't sure how to fix the travel problem

CAUTION!!! politicians may be hazerdous to your well being

PM  EMAIL  GALLERY  Attn:RR  Quote
02-19-2014 06:30 PM  3 years agoPost 9
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Exactly, end points on the rudder channel control how fast the gyro will let the heli piro, that much is the same as the 401 (or most hh gyros)

I suppose real old school is when you hear the gyro spin up

Edit: If you want to do it right, get a servo wheel with no holes, and find the point that gives you stop to stop throw w/o binding and drill a hole

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
02-19-2014 06:54 PM  3 years agoPost 10
BENTDABOOM

rrKey Veteran

west seattle

My Posts: All  Forum  Topic

on this particular tail rod setup thiers 2 tail rod guides on the boom so if I move the clevis closer to the servo spline itll bend the tail rod big time cuzz of the guide so were having to make a carbon rod for a straight shot back.

just finished with the carbon rod thing which works real good,and no wheel needed just used the 2 hole in on the servo arm

CAUTION!!! politicians may be hazerdous to your well being

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 411 views POST REPLY
Scorpion Power Scorpion Power
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, October 17 - 8:54 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online