RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 739 views
Scorpion Power Scorpion Power
HelicopterGaui NX4 NX7Other › Binding Problem
12-22-2013 08:22 PM  3 years agoPost 1
doug p

rrApprentice

blaine mn USA

My Posts: All  Forum  Topic

I have been using the vbar setup program to bind to a Gaui NX4. After selecting my satellites it should go to the bind sequence but the program doesn't. It goes into a coldstart function and it won't get past that. Any advice?

Doug P.

PM  EMAIL  Attn:RR  Quote
12-22-2013 08:26 PM  3 years agoPost 2
jczankl

rrKey Veteran

AZ

My Posts: All  Forum  Topic

Restart the program and unplug the model. Also be sure to select the right MS 11 or 22ms for your sat. If wrong it won't bind properly.

Has worked for me. Are you using a switch?

GAUI/Empire
Spinblades
PowerMaster Fuels
Graupner
Castle Creations
Scorpion Motor

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-22-2013 08:34 PM  3 years agoPost 3
doug p

rrApprentice

blaine mn USA

My Posts: All  Forum  Topic

I've restarted the program several times and am selecting the right sat. And I am using a switch. It is just stuck in a loop of coldstart. I even select that, it initializes and proceeds to show the Bind button, then it instantly goes back to a coldstart button.
Doug P.

PM  EMAIL  Attn:RR  Quote
12-23-2013 07:04 PM  3 years agoPost 4
RadDuke

rrNovice

Cottage Grove, MN -​USA

My Posts: All  Forum  Topic

Couple things. One if you are using only one satellite reciever, it needs to be plugged in to the RX-1 spot. If it's in the RX-2 it won't work properly.

Are you using one satellite or two?

Are you using the GAUI version of the yellow VBar software? or the full Mikado express software? Also are you using the GAUI computer software or the Mikado VBar computer software?

If you are using the GAUI version of one or the other, with the Mikado version of one or the other, I've seen this happen.

The best thing to do is register the vbar with mikado and update it free to the mikado version (if it's not already). Also download the mikado current version of the computer software and it should work fine.

Gaui X7 - Gaui X5 - Gaui X4 II - Gaui NX4 - Gaui X3 - Gaui X2

PM  EMAIL  GALLERY  Attn:RR  Quote
12-23-2013 11:23 PM  3 years agoPost 5
doug p

rrApprentice

blaine mn USA

My Posts: All  Forum  Topic

Raduke I am using the vbar 5.3.4b software, but the fbl unit is the gaui yellow box vbar and I think that is the problem,i will put the disc that came with it in my comp tomorrow and see if that works,by the way this is my frist gaui and I am very impressed with it the quality for fit an finish is awesome can't wait to fly it!!
By the way I am rite up the road from you in Blaine MN.

Thanx for the help,maybe we can get together an fly some time.

Doug P

PM  EMAIL  Attn:RR  Quote
12-24-2013 01:05 AM  3 years agoPost 6
doug p

rrApprentice

blaine mn USA

My Posts: All  Forum  Topic

Well that did the trick. I used the Gaui version and the program ran just fine and the heli is now bound. The software must be different enough to cause this.

Thanks!

Doug P.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 739 views
Scorpion Power Scorpion Power
HelicopterGaui NX4 NX7Other › Binding Problem
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, November 19 - 1:28 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online