RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 773 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › Mini V-Bar will not Bind
12-22-2013 08:20 PM  3 years agoPost 1
doug p

rrApprentice

blaine mn USA

My Posts: All  Forum  Topic

I have been using the vbar setup program to bind to a Gaui NX4. After selecting my satellites it should go to the bind sequence but the program doesn't. It goes into a coldstart function and it won't get past that. Any advice?

Doug P.

PM  EMAIL  Attn:RR  Quote
12-23-2013 03:32 AM  3 years agoPost 2
rcflyerheli

rrKey Veteran

Granbury, TX USA

My Posts: All  Forum  Topic

Is this the Vbar unit that is packaged with the Gaui or is it a stand alone Vbar unit purchased separately? I am not familiar with the Gaui version, but I've never had any of my setups not go into the bind mode on a standard Vbar.

Are you running pro version, and have you registered the vbar and gotten the latest firmware upgrade?

If you haven't gotten that done, that should be your first step.

Goblin 700, Trex 700DFC, Gaui X7, Logo 690SX, Logo 600SX; Trex 470 Trex 500
Amain Team Rep

PM  EMAIL  GALLERY  Attn:RR  Quote
12-23-2013 04:32 AM  3 years agoPost 3
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

I am pretty sure you have to power cycle after selecting DSMwhatever sats,
then when you power back on, the vbar+sats should be on bind mode

S

Team Minicopter - PeakAircraft.com
bavarianDEMON- Team Kontronik - Scorpion Motors-

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-23-2013 12:16 PM  3 years agoPost 4
Retired2011

rrElite Veteran

Lee's Summit, MO

My Posts: All  Forum  Topic

Hopefully, this is a silly question, but are you clicking on the BIND button, after selecting the sat configuration?
Then cycling power as MPV said?

Chet

PM  EMAIL  GALLERY  Attn:RR  Quote
12-23-2013 12:31 PM  3 years agoPost 5
Gary H

rrVeteran

Minnesota ​USA

My Posts: All  Forum  Topic

Had the same problem on the silverline pro until I cycled the power, then bingo!

GH

PM  EMAIL  GALLERY  Attn:RR  Quote
12-23-2013 01:35 PM  3 years agoPost 6
doug p

rrApprentice

blaine mn USA

My Posts: All  Forum  Topic

I have 3 vbars, this is gaui mini vbar. and ves I cycled the power but it is stuck in a cold start mode,i think the guai program must be difrent

PM  EMAIL  Attn:RR  Quote
12-24-2013 01:12 AM  3 years agoPost 7
doug p

rrApprentice

blaine mn USA

My Posts: All  Forum  Topic

I loaded the Gaui version and the program ran just fine and the heli is now bound! The bind button didn't instantly switch to a coldstart button, actually allowed me to click it. Couldn't even select bind before, the software wouldn't allow it.

Thanks all!
Doug P.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 773 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › Mini V-Bar will not Bind
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, November 23 - 11:27 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online