RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 1315 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › Mini Vbar Governor with RCE-BL45X
12-18-2013 07:32 AM  3 years agoPost 1
robv

rrApprentice

SoCal

My Posts: All  Forum  Topic

I'm getting gear chatter with Vbar governor. It seems to get a little better when I drop gov gain down to 10, but it's still chattering when unloading head.

I'm using HW sensor with ESC settings as follows:

Quick throttle response, slow start Heli mode, BEC at 6v w/o stepping down voltage to sensor.

Can anyone shed some light on how to optimize this setup? How does the Hyperion sensor compare? Thanks in advance.

Team JR | Gens Ace | YS Engines | Scorpion Motors | Pure Tech

PM  EMAIL  GALLERY  Attn:RR  Quote
12-18-2013 07:44 AM  3 years agoPost 2
Sam2b

rrElite Veteran

Seattle, WA

My Posts: All  Forum  Topic

One consideration could be the ESC endpoints set within the Vbar setup (the gov tabs). Mr Mel's videos show this in depth. Are you sure you did that correctly?

Here: http://heli.dacsa.net/MrMelSite/sty...ed-9/index.html

Watch at YouTube

_Sam B_
Team MSH USA * Protos Max * Xpert servos * Cyclone Blades * ProgressiveRC * VoltMagic * Ecalc

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-19-2013 12:35 AM  3 years agoPost 3
robv

rrApprentice

SoCal

My Posts: All  Forum  Topic

Sam,

Yes, I believe I calibrated the throttle correctly. Just set up at 100/100 and calibrate throttle with box checked in gov2 tab.

Here's a question... Do I have to recalibrate the throttle when I enable the governor AFTER calibrating it without governor enabled? Even if I keep the throttle at 100/100 on gov2 tab?

Also, what settings would be best with the Align ESC? Airplane mode vs Heli w/ soft spool? Mid vs high timing? Would the Hyperion sensor be better than the HW win this ESC?

Team JR | Gens Ace | YS Engines | Scorpion Motors | Pure Tech

PM  EMAIL  GALLERY  Attn:RR  Quote
12-19-2013 03:03 AM  3 years agoPost 4
Sam2b

rrElite Veteran

Seattle, WA

My Posts: All  Forum  Topic

Just set up at 100/100 and calibrate throttle with box checked in gov2 tab.
Ah, but then is step#2 AFTER that. Again, slowly watch the video I included above to see that step. That might be what you are referring to in your question. See the video, please.

Regarding Align ESC, those ESC are not certified to work, so performance may be worse. YGE, Castle, Kontronic HeliJive, and a few others are the only ones proven to work [well] with the vbar gov.

_Sam B_
Team MSH USA * Protos Max * Xpert servos * Cyclone Blades * ProgressiveRC * VoltMagic * Ecalc

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1315 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › Mini Vbar Governor with RCE-BL45X
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Friday, November 24 - 6:36 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online