RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 434 views POST REPLY
HelicopterMain Discussion › 713 Main Blades on a 91SZ?
11-10-2013 04:54 PM  4 years agoPost 1
lajwab

rrApprentice

Chicago, ILL

My Posts: All  Forum  Topic

Hi,
I had dead stick auto on my Hirobo Freya SSt and damaged the main blades and tail blades.
I was using 700mm Main Blades and stock nlue tail blades I beleive they were 105mm. The
My question is can I use 713mm Main Blades on my heli.? The motor is an OS91 SZ one with blue head non-pumped with CY 90 size pipe. I'm using 30% nitro fuel.
What size tail blades should I get with these 713 blades?

Any help will be highly appreciated.

Regards,

Arshad

PM  EMAIL  GALLERY  Attn:RR  Quote
11-10-2013 05:45 PM  4 years agoPost 2
Einzelganger

rrKey Veteran

Campbell, Texas

My Posts: All  Forum  Topic

Best to use 680's or 690's for any kind of hard 3d.
Freya head is wider than most others. The disk span equals a Raptor running 710's when using 680's on the Freya.
You don't want to downsize the tail blades.

Wayne

I love the smell of nitro in the morning.
RIP Roman

PM  EMAIL  GALLERY  Attn:RR  Quote
11-11-2013 03:27 AM  4 years agoPost 3
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

+1
That first generation Freya head should use no more than 700mm blades. You can get away with 100mm tails because the tail head diameter is pretty wide as well. 713's plus 100+ mm tails will run with interference and risks a strike with any kind of zealous flying.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 434 views POST REPLY
HelicopterMain Discussion › 713 Main Blades on a 91SZ?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, May 21 - 12:18 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online