RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 911 views POST REPLY
HelicopterFlybarless Rotor Head SystemsV-Bar › mini vbar blue version new sensor.
11-07-2013 12:02 AM  4 years agoPost 1
knightofcarnage

rrElite Veteran

chicago

My Posts: All  Forum  Topic

Anyone know how to tell if your mini vbar version is using the new sensor (aka hardware revision)? I believe there was a way with serial numbers.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-07-2013 12:07 AM  4 years agoPost 2
AWittleWabbit

rrElite Veteran

O.C., CA

My Posts: All  Forum  Topic

I think if there is 15000 and above at the end of the s/n.

It buried in Mikado's site somewhere.

Heli-itis sufferer.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-07-2013 12:19 AM  4 years agoPost 3
knightofcarnage

rrElite Veteran

chicago

My Posts: All  Forum  Topic

found an old post from Mrmel
No difference in either firmware or hardware except that the partnumber they where using was discontinued, so they had to change, new partnumber required new firmware, it's still same manufacturer and spec.

serial 151xxx = 2 x sensor
serial 152xxx is 1 x sensor.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-04-2015 07:01 AM  3 years agoPost 4
SR911

rrNovice

Melbourne, Australia

My Posts: All  Forum  Topic

I have 3 mini VBar about 3 years old. I ordered a new one that comes with 5.3.4 firmware installed. Opening up the case of the old one and the new one, I do notice a difference. The new one seems to have additional boards soldered on at the bottom. I am attaching pictures of the two for comparison (top image is the older version). Does anybody know if the new mini VBar is better in any way, or is it just a redesign of the hardware for the newer version ?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-04-2015 05:44 PM  3 years agoPost 5
HilliHeli

rrVeteran

S.MI./FL.

My Posts: All  Forum  Topic

Some differences are shown in this chart ;

http://www.vstabi.info/en/featurematrix

!Antriebe, die bewegen!
Henseleit-Helicopters.de
Jazz', Jives & vbar's
Futaba FASST / FASSTest

PM  EMAIL  GALLERY  Attn:RR  Quote
02-04-2015 07:17 PM  3 years agoPost 6
SR911

rrNovice

Melbourne, Australia

My Posts: All  Forum  Topic

All four of my Mini VBar are BlueLine. Its just that the latest one I bought which comes with 5.3 firmware installed, seems to have a different hardware design (see picture in my Gallery), thus my questions. Does this new one have a different hardware/sensor design that wasn't advertised ?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2015 04:47 PM  3 years agoPost 7
EPGuy

rrNovice

UK

My Posts: All  Forum  Topic

edit

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 911 views POST REPLY
HelicopterFlybarless Rotor Head SystemsV-Bar › mini vbar blue version new sensor.
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Sunday, May 27 - 1:05 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online