RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 432 views POST REPLY
HelicopterAerial Photography and Video › ACE ONE cant set in atti mode
10-11-2013 03:35 PM  4 years agoPost 1
Heliscale

rrNovice

Maschwitz

My Posts: All  Forum  Topic

Hi guys!
Another problem is that we lately couldnt set up the program to be in atti mode (instead of gps atti) in the 2nd position for the 3 posistions switch. When I put "write" after chossing the atti mode (as to have manual/atti/cruise configuration), it jumps directly to GPS Atti. Do you know anything about it?

Regards

PM  EMAIL  Attn:RR  Quote
10-11-2013 05:13 PM  4 years agoPost 2
splitboarder

rrApprentice

San Diego, California

My Posts: All  Forum  Topic

Go to the assistant software and pull up the screen that shows the three positions as tabs . Put your switch in manual mode and the manual tab should be blue.
Go to the trim or travel adjust in your TX. Move the travel limits and you should see the blue area move between manula, failsafe and atti. You should be able to move the blue portion around by adjusting the travel gain on the switch you are using

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 432 views POST REPLY
HelicopterAerial Photography and Video › ACE ONE cant set in atti mode
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, April 19 - 4:54 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online