RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 1008 views POST REPLY
Helicopter
e-
Thunder Tiger
Raptor X50E › Rc Booya mounts for X50
10-10-2013 06:27 AM  4 years agoPost 1
Adam Landefeld

rrApprentice

Lehi, UT, USA

My Posts: All  Forum  Topic

In my quest to have all my machines have Rc Booya mounts (I never want to mess with grommets or screws or anything else ever again) I did some measuring and going through all the different components that are available from RC Booya and I found the exact kit necessary for the Thunder Tiger x50. If you buy the Synergy N5 "rear" kit you will get what you need for the x50. All you need to do is trim 3mm off your studs that screw into the anti rotation bracket and then thread these on. Enjoy!

-Adam

Futaba Factory Team
Team FlightPower
Thunder Tiger

https://www.facebook.com/UtahHeli

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2013 01:43 AM  4 years agoPost 2
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Can you post a side shot(with out the canopy on)of the mounting post and elevator linkage?

PM  EMAIL  Attn:RR  Quote
10-11-2013 05:49 AM  4 years agoPost 3
Adam Landefeld

rrApprentice

Lehi, UT, USA

My Posts: All  Forum  Topic

I'll get you a picture asap. Just so you know, there is about 2.0 mm of clearance at the closest point.

-Adam

Futaba Factory Team
Team FlightPower
Thunder Tiger

https://www.facebook.com/UtahHeli

PM  EMAIL  GALLERY  Attn:RR  Quote
10-12-2013 05:57 AM  4 years agoPost 4
Adam Landefeld

rrApprentice

Lehi, UT, USA

My Posts: All  Forum  Topic

Here are a couple pics showing the closest the linkage can possibly get. It is very close but still clear and free.

-Adam

Futaba Factory Team
Team FlightPower
Thunder Tiger

https://www.facebook.com/UtahHeli

PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2013 11:37 PM  4 years agoPost 5
johnbs8

rrKey Veteran

roseville michigan

My Posts: All  Forum  Topic

man ive been riding booya for years now about making one work. Thanks adam im gonna make that mod to mine!!

TT X50 Nitro
Warp 360
Logo 550sx
TeaM KicKnWinG

PM  EMAIL  GALLERY  Attn:RR  Quote
10-30-2013 09:17 AM  4 years agoPost 6
BrianApp

rrVeteran

Grand Rapids, MI

My Posts: All  Forum  Topic

Are you using the FBL elevator arm? If not the slightly longer FBL arm might rub.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-30-2013 04:11 PM  4 years agoPost 7
z11355

rrMaster

New England

My Posts: All  Forum  Topic

stupid design. I discovered that last night using the FBL arm and I was using the outermost holes on a * arm to try to match the size of the FBL arm.

Ended up grinding a bit off the mounting post and the ball link to get clearance.

I also inserted heli-coil inserts in the anti-rotation arm and used nylon setscrews so the post will break off vs. breaking the CF frame in a earth-interface event

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1008 views POST REPLY
Helicopter
e-
Thunder Tiger
Raptor X50E › Rc Booya mounts for X50
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, April 20 - 12:31 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online