RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 398 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › problem setting up vibe 50 nex
08-03-2013 05:18 PM  4 years agoPost 1
f14tomcatfreak

rrVeteran

rochester,ny us

My Posts: All  Forum  Topic

hi im using a spectrum ar9020 9ch receiver in my vibe 50 nex. I have my swash type set to 140ccpm. I cant seem to get the swash travel/direction set properly.. manual says take the right swash servo and plug it into aileron port and left swash servo plugs into the aux1.. I have reversed wire sequence hoping that was the issue but did not help... .. all I can think of is that because the instructions show diagram for jr receiver the wiring is not the same for spectrum? any help would be appreciated

shut up and fly

PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 07:00 PM  4 years agoPost 2
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

No that is not the problem. 120 or 140 degree CCPM, you need to follow a simple sequence to get all servos moving correctly with respect to each other, and with respect to the control stick. This requires a combination of using the individual channel reversing functions and the use of the SWASH MIX/SWASH AFR settings for Pitch, Aileron, and Elevator.

Although written for a 120 degree CCPM setup, follow this, you will be successful:

https://rc.runryder.com/helicopter/p4325158/

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 08:47 PM  4 years agoPost 3
f14tomcatfreak

rrVeteran

rochester,ny us

My Posts: All  Forum  Topic

thanks a lot for the help. keep you posted

shut up and fly

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 398 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › problem setting up vibe 50 nex
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Thursday, October 19 - 10:13 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online