RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 1249 views POST REPLY
HelicopterRadio - Futaba FASST › Power pack telemetry on T14SG/R70008SB
05-31-2013 10:01 AM  4 years agoPost 1
Helicek

rrVeteran

istanbul - turkey

My Posts: All  Forum  Topic

Hi all,
I am new to this radio and learning very slowly. Can you help me find the right cable-connector for the extra voltage socket on the R7008SB?
Thanks,
Ahmet

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-31-2013 02:11 PM  4 years agoPost 2
wargor

rrApprentice

Islands

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2013 09:53 PM  4 years agoPost 3
Helicek

rrVeteran

istanbul - turkey

My Posts: All  Forum  Topic

Hi Wargor.
One is a sensor and the other is cable with the proper micro plug that goes in the rx($17.99). Do you know if they function similarly?
Thanks a lot.
Ahmet

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-02-2013 09:57 PM  4 years agoPost 4
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

My Posts: All  Forum  Topic

I use the first link on Wargor's list.

Team Synergy, Rail blades, Team Scorpion, V-Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-02-2013 10:08 PM  4 years agoPost 5
Helicek

rrVeteran

istanbul - turkey

My Posts: All  Forum  Topic

Hi steffgiguere,

you just connect your 12S LiPos (correct polarity) to the end of the leads, plug the other end to the external voltage socket on the RX and can see voltage on the TX screen with this right?
Great

Ahmet

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-02-2013 10:34 PM  4 years agoPost 6
wargor

rrApprentice

Islands

My Posts: All  Forum  Topic

I use the first one. I just have the leads connects to the neg and pos on my esc and plug the other end to the external voltage socket on the RX. The information shows up on the screen. All my setups are this way.

Warren

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2013 01:12 AM  4 years agoPost 7
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

My Posts: All  Forum  Topic

That is right Helicek

Team Synergy, Rail blades, Team Scorpion, V-Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-04-2013 02:41 AM  4 years agoPost 8
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

Remember there is a 1 amp fast blow fuse on the positive side of the circuit.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
06-09-2013 11:39 PM  4 years agoPost 9
Tomsdk

rrNovice

Vestbjerg - Denmark

My Posts: All  Forum  Topic

Fuse
No, you really want the fuse on the negative side!

Also, see manual: http://manuals.hobbico.com/fut/sbs-01v-manual.pdf

Best regards,
Thomas Jorgensen

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1249 views POST REPLY
HelicopterRadio - Futaba FASST › Power pack telemetry on T14SG/R70008SB
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, May 26 - 5:21 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online