RunRyder RC
 6  Topic Subscribe
WATCH
 1 page 1134 views
Helicopter
e-
Mikado
Logo 600 › Logo 600 SE battery weight
01-25-2013 08:09 PM  4 years agoPost 1
Tyler

rrElite Veteran

Chicagoland area

My Posts: All  Forum  Topic

Running a logo 600 see on 10s, how many grams should each 5s pack weigh?

Considering 5s 5300's.

Enjoy things that money can buy IF you don't lose the things money can't buy.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-25-2013 08:57 PM  4 years agoPost 2
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

I run 6s 5000 mah in my logo 600se and the balance is almost perfect. The weight of each lipo is about 850g.

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
01-25-2013 09:12 PM  4 years agoPost 3
Tyler

rrElite Veteran

Chicagoland area

My Posts: All  Forum  Topic

Wow much heavier than expected!! 785 g should be fine the? Are you nose or tail heavy?

Enjoy things that money can buy IF you don't lose the things money can't buy.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-25-2013 09:22 PM  4 years agoPost 4
Tyler

rrElite Veteran

Chicagoland area

My Posts: All  Forum  Topic

Using 613g packs I have to space the batteries forward about 3 inches from the back of the frame.

Enjoy things that money can buy IF you don't lose the things money can't buy.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-25-2013 09:31 PM  4 years agoPost 5
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

I keep the CG even buy moving the batteries forward or backwards, Where ever they have to be for good CG is where I strap em down!

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2013 02:10 AM  4 years agoPost 6
HeliMan Dave

rrVeteran

Suburban Chicago

My Posts: All  Forum  Topic

Tyler, here's what Shawn (OICU812) said when I inquired before building mine.

"Make sure to not exceed 1180-1200max grams in pack weight, so I advise in 10S ttl fashion to stay 4500mah or less for sure. Voltz has some good sizes and weights"

-Dave

Logo 700 / 600 / 500 V-Bar NEO / Blade 180CFX / mCPX BL / Nano / V-Control

PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2013 03:32 AM  4 years agoPost 7
Ace Dude

rrProfessor

USA

My Posts: All  Forum  Topic

I found the same thing quite often when I was searching for packs...stay around 1200g.

  

PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2013 03:35 AM  4 years agoPost 8
Tyler

rrElite Veteran

Chicagoland area

My Posts: All  Forum  Topic

785 grams per battery would certainly take me over the 1200g limit. Are you guys using 1200g batteries moving the stick pack forward to achieve the proper CG?

Tyler

Enjoy things that money can buy IF you don't lose the things money can't buy.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2013 03:37 AM  4 years agoPost 9
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

too lazy to run out and weigh them (though i will if you want...just ask)

but, the only 5300s i can think of are the gens ace. that's what i fly.

10s balance perfectly in an SE. no weight needed anywhere. and, it doesn't feel heavy at all on 620s @2200. in fact it feels a bit on the light side compared with other 600s ive flown.

if it ain't broke, break it.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-27-2013 03:41 AM  4 years agoPost 10
Tyler

rrElite Veteran

Chicagoland area

My Posts: All  Forum  Topic

I would greatly appreciate it if you would post your battery weights as you find the time and gumption. PLEASE!

Enjoy things that money can buy IF you don't lose the things money can't buy.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2013 05:57 AM  4 years agoPost 11
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

packs are 627g each
AUW of 4120g...that's fully loaded and ready to fly. i'm running a full sized black vbar with sats, a BEC and CC110HV ESC, BLS451/251 and a scorpion 4035-560, quick tail, stock SE canopy, and radix 620s.

hope that helps.

if it ain't broke, break it.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-27-2013 06:01 AM  4 years agoPost 12
Tyler

rrElite Veteran

Chicagoland area

My Posts: All  Forum  Topic

Cuda, are you using the SE long boom or shorter 3D boom? Thanks so much for your specific details.

Enjoy things that money can buy IF you don't lose the things money can't buy.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2013 06:06 AM  4 years agoPost 13
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

long boom. i like tossing on 690s/105s @ 1850 every once in a while. i think you'd have to add tail weight with the shorter boom.

if it ain't broke, break it.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-31-2013 07:36 AM  4 years agoPost 14
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

Ya you have to stay around 1200 max or certainly expect to add some weight to the tail section in order to obtain decent COG.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
01-31-2013 09:48 PM  4 years agoPost 15
BobOD

rrElite Veteran

New York- USA

My Posts: All  Forum  Topic

Yeay, you'll have to stick some lead to the tail if you use the 3D boom. Not much though.

Team POP Secret

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1134 views
Helicopter
e-
Mikado
Logo 600 › Logo 600 SE battery weight
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Monday, December 18 - 5:21 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online