I am having overspending with a mix of governor kick intermittent not tail kick. Is like when I push the Heli on a climb out tictoc sudden pitch changes the governor kicks and you can hear the motor like skipping..... Like when you miss a tooth on your tail gear that's what I am experience.
Now I mount the sensor close to the motor check the pics.
Should I change the location of the sensor maybe the heat of the motor affecting the sensor??
I'm using the CC 160hv which is new and previously I was using the 120hv and it was doing the same thing the weird thing is I use it for maybe 20 or 30 flight with the 120hv CC AND after maybe 20 flight I start experiencing this.
So I change the ESC not because of this but to have a bigger ESC since I stretch my suzi to 800. The Vbar so far is working excellent no problem everything is perfect but the governor like I said after 20 or so flights it start acting.
I have another Hobbywing sensor which I'm planning to use to see if that's the problem which I think it is but I want it to know if anyone had experience this or can tell my if the sensor been where it is that's the problem.
Thanks in advance!!!
Suzi Janis 800e & 700e 3blade both w/Ikon