Up for sale is a lightly used Denon DN-X800 digital/ analog 4 channel DJ mixer.
This unit is in great shape functionality and physically wise.
The X-Effect is a unique feature which is designed to work
with the DENON DN-2100F and DN-2600F CD players.
The fader start of the below functions can be used with the
Sampler, Hot start brake/platter, Hot start 1, 2 (each drive).
2. CH. Fader and Crossfader start
The CD player can be started or stopped simply by
increasing or decreasing the level of the CH fader or by
using the cross fader left to right or right to left. (This
function can only be used when the DENON CD players
DN-1800F, DN-2100F or DN-2600F is connected to the
3. Digital outputs
The DN-X800 allows you to record directly to CD-R,
MiniDisc or a hard disk device through it's exclusive coaxial
The digital outputs maintains a constant 16 bit / 44.1 kHz
4. Digital inputs
The DN-X800 accepts up to 4 digital inputs.
Such as our family of performers, DN-1800F, DN-2100F,
DN-2600F, DP-DJ151 or any device with a digital output.
The sampling frequency range can be 32 kHz, 44.1 kHz or
5. Enhanced input/output terminals (Analog)
8 Line, 3 Phono, 2 microphone systems, 2 Main outputs,
Zone output, Booth output, Sub woofer output and tape
output are provided independently. Effect in/out terminals
are also provided for a external effects processor.
6. 3-Band equalizer/Gain
Bass, Mid, Treble and Gain controls are available on every
7. Crossfader contour
This feature allows adjusting the "shape" of the Crossfader
response from a gentle curve for smooth, long running
fades, to the steep pitch required for top performance cut
and scratch effects.
8. Mic post
This feature will pass the Main Mic signal into the Zone,
Booth, Tape output and Digital output signal path.
In the OFF mode, the MIC signal will not be routed through
the above outputs
Dimensions- 482 (W) x 105 (H) x 177 (D) mm (without feet)
Installation- 19-inch rack mountable 4U
Power supply- 230 V AC ±10%, 50 Hz (Europe model)
220 V AC ±10%, 50 Hz (China model)
Power consumption- 26 W
-Input Sensitivity & Impedance: Main Mic-54 dBV (2.0 mV)Aux Mic-60 dBV (1.0 mV)Effect (Return)-14 dBV (200 mV)3-Phono-50 dBV (3.0 mV)8-Line-14 dBV (200 mV)
-Output level & Impedance:Main (Balanced)4 dBm(1.23 V)Main (Unbalanced)0 dBV(1.0V)Zone (Balanced)4 dBm(1.23 V)Booth (RCA)6 dBV(2.0 V)Tape (RCA)-10 dBV (316 mV)Effect (Send)-14 dBV (200 mV)Subwoofer-2 dBV(800 mV)Headphone-4 dBV(630 mV)
-Frequency Response:Line20 to 20 kHz ±2 dBPhono20 to 20 kHz RIAA ±2 dBMic20 to 20 kHz ±2 dB
-Signal to Noise ratio:Line80 dB0 dBm, 1 kHz, EQ flatPhono75 dB0 dBm, 1 kHz, EQ flatMain Mic65 dB0 dBm, 1 kHz, EQ flat
-Total harmonic distortion rate:LineBelow 0.05%PhonoBelow 0.05%
-Cross talk:Over 70 dB
-Channel equalizer:Hi+10 dB, -26 dB (13 kHz)Mid+10 dB, -26 dB (1 kHz)Low+10 dB, -26 dB (100 Hz)
-Microphone equalizer:Hi+12 dB, -12 dB (10 kHz)Mid+12 dB, -12
-Digital input: Input sensitivity
-Signal format: SPDIF
-Output level:0.5 Vp-p 75 ohms
-Digital output:Signal format-IEC958 Type II
-Output level: 0.5 Vp-p 75 ohms
-Output signal level: -6 dB
MAKE ME AN OFFER VIA PM!!
I'M OPEN TO TRADES AS WELL!