RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 841 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › Solid G Gyro with Savox SH-1290MG - what servo setting??
08-31-2012 01:24 AM  5 years agoPost 1
angelob

rrKey Veteran

Stoughton WI

My Posts: All  Forum  Topic

I chose to replace my failed JR 8700 tail servo with a Savox SH-1290MG. On the Solid-G, there are settings for common servos such as:

Standard
JR 8700
Futaba 9251/9256
JR 8900
Futaba 9253/9254

Anyone know which setting should be used with the Savox? Here are its specs:

Speed(@4.8V sec/60): .06
Torque(@4.8V oz-in): 55.5
Speed(@6.0V sec/60): .05
Torque(@6.0V oz-in): 69.4
Gear: Metal
Bearing: 2BB
Case: Aluminum
Running current (at no load): 200 mA @ 4.8V
Running current (at no load): 250 mA @ 6.0V
Stall current (at locked): 2.4 A @ 4.8V
Stall current (at locked): 3.0 A @ 6.0V
Idle current (at stopped): 5 mA @ 4.8V
Idle current (at stopped): 5 mA @ 6.0V
Connector wire gauge: ”22 AWG
Connector wire length: 300}5 mm
Horn gear spline: 25T
Control system: Pulse width modification
Amplifier type: Digital Controller
Operating Travel: 100‹ (when1000¨2000 usec)
Neutral position: 1520 usec
Rotating direction: Counterclockwise (when1500¨2000 usec)
Pulse width range: 800¨2200 usec
Maximum travel: Approx 154‹(when800¨2200 usec)

PM  EMAIL  GALLERY  Attn:RR  Quote
08-31-2012 08:58 PM  5 years agoPost 2
Scandar

rrApprentice

Santiago-Chile

My Posts: All  Forum  Topic

Hi,

1520uSec at 333Hz, you must select the futaba 9253/9254.

Regards
Esteban

PM  EMAIL  GALLERY  Attn:RR  Quote
08-31-2012 10:08 PM  5 years agoPost 3
angelob

rrKey Veteran

Stoughton WI

My Posts: All  Forum  Topic

Thanks for the reply. I'll try it out when three servo arrives

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 841 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › Solid G Gyro with Savox SH-1290MG - what servo setting??
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, October 19 - 9:04 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online